[ 0.000000] Linux version 5.10.0-30-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.218-1 (2024-06-01) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-30-amd64 root=UUID=56485174-9364-48e1-9955-f61345f29fd2 ro console=ttyS1,115200n8 raid0.default_layout=2 elevator=deadline [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000068bfefff] usable [ 0.000000] BIOS-e820: [mem 0x0000000068bff000-0x000000006ebfefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006ebff000-0x000000006f9fefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006f9ff000-0x000000006fffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec80000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.2 present. [ 0.000000] DMI: Dell Inc. PowerEdge R440/08CYF7, BIOS 2.21.1 03/07/2024 [ 0.000000] tsc: Detected 2100.000 MHz processor [ 0.000910] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000914] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000923] last_pfn = 0x1080000 max_arch_pfn = 0x400000000 [ 0.000928] MTRR default type: uncachable [ 0.000929] MTRR fixed ranges enabled: [ 0.000931] 00000-9FFFF write-back [ 0.000932] A0000-BFFFF uncachable [ 0.000933] C0000-FFFFF write-protect [ 0.000934] MTRR variable ranges enabled: [ 0.000936] 0 base 000000000000 mask 3FF000000000 write-back [ 0.000937] 1 base 001000000000 mask 3FFF80000000 write-back [ 0.000938] 2 base 000080000000 mask 3FFF80000000 uncachable [ 0.000939] 3 base 000070000000 mask 3FFFFC000000 uncachable [ 0.000940] 4 disabled [ 0.000941] 5 disabled [ 0.000942] 6 disabled [ 0.000942] 7 disabled [ 0.000943] 8 disabled [ 0.000944] 9 disabled [ 0.001722] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003008] e820: update [mem 0x70000000-0x73ffffff] usable ==> reserved [ 0.003013] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.003018] last_pfn = 0x70000 max_arch_pfn = 0x400000000 [ 0.013058] Using GB pages for direct mapping [ 0.013393] RAMDISK: [mem 0x33831000-0x35c0ffff] [ 0.013399] ACPI: Early table checksum verification disabled [ 0.013405] ACPI: RSDP 0x00000000000FE320 000024 (v02 DELL ) [ 0.013410] ACPI: XSDT 0x000000006FBA0188 000104 (v01 DELL PE_SC3 00000000 01000013) [ 0.013417] ACPI: FACP 0x000000006FFF9000 000114 (v06 DELL PE_SC3 00000000 DELL 00000001) [ 0.013424] ACPI: DSDT 0x000000006FD01000 2E81B0 (v02 DELL PE_SC3 00000003 DELL 00000001) [ 0.013429] ACPI: FACS 0x000000006F76E000 000040 [ 0.013432] ACPI: SSDT 0x000000006FFFC000 00046C (v02 INTEL ADDRXLAT 00000001 INTL 20180508) [ 0.013436] ACPI: WD__ 0x000000006FFFB000 000134 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013440] ACPI: SLIC 0x000000006FFFA000 000024 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013444] ACPI: HPET 0x000000006FFF8000 000038 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013448] ACPI: APIC 0x000000006FFF6000 0016DE (v04 DELL PE_SC3 00000000 DELL 00000001) [ 0.013452] ACPI: MCFG 0x000000006FFF5000 00003C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013456] ACPI: MIGT 0x000000006FFF4000 000040 (v01 DELL PE_SC3 00000000 DELL 00000001) [ 0.013459] ACPI: MSCT 0x000000006FFF3000 000090 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013463] ACPI: PCAT 0x000000006FFF2000 000088 (v02 DELL PE_SC3 00000002 DELL 00000001) [ 0.013467] ACPI: PCCT 0x000000006FFF1000 00006E (v01 DELL PE_SC3 00000002 DELL 00000001) [ 0.013471] ACPI: RASF 0x000000006FFF0000 000030 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013475] ACPI: SLIT 0x000000006FFEF000 00042C (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013479] ACPI: SRAT 0x000000006FFEC000 002D30 (v03 DELL PE_SC3 00000002 DELL 00000001) [ 0.013482] ACPI: SVOS 0x000000006FFEB000 000032 (v01 DELL PE_SC3 00000000 DELL 00000001) [ 0.013486] ACPI: WSMT 0x000000006FFEA000 000028 (v01 DELL PE_SC3 00000000 DELL 00000001) [ 0.013490] ACPI: OEM4 0x000000006FC53000 0AD1C1 (v02 INTEL CPU CST 00003000 INTL 20180508) [ 0.013494] ACPI: OEM1 0x000000006FC25000 02D971 (v02 INTEL CPU EIST 00003000 INTL 20180508) [ 0.013498] ACPI: OEM2 0x000000006FBF2000 0320C9 (v02 INTEL CPU HWP 00003000 INTL 20180508) [ 0.013502] ACPI: SSDT 0x000000006FBBA000 037465 (v02 INTEL SSDT PM 00004000 INTL 20180508) [ 0.013507] ACPI: SSDT 0x000000006FFFD000 000C94 (v02 DELL PE_SC3 00000000 DELL 00000001) [ 0.013511] ACPI: SSDT 0x000000006FBB6000 00357F (v02 INTEL SpsNm 00000002 INTL 20180508) [ 0.013515] ACPI: SPCR 0x000000006FBB5000 000050 (v02 00000000 00000000) [ 0.013519] ACPI: DMAR 0x000000006FBB4000 000180 (v01 DELL PE_SC3 00000001 DELL 00000001) [ 0.013523] ACPI: HEST 0x000000006FBB3000 00017C (v01 DELL PE_SC3 00000002 DELL 00000001) [ 0.013527] ACPI: BERT 0x000000006FBB2000 000030 (v01 DELL PE_SC3 00000002 DELL 00000001) [ 0.013531] ACPI: ERST 0x000000006FBB1000 000230 (v01 DELL PE_SC3 00000002 DELL 00000001) [ 0.013535] ACPI: EINJ 0x000000006FBB0000 000150 (v01 DELL PE_SC3 00000002 DELL 00000001) [ 0.013538] ACPI: Reserving FACP table memory at [mem 0x6fff9000-0x6fff9113] [ 0.013540] ACPI: Reserving DSDT table memory at [mem 0x6fd01000-0x6ffe91af] [ 0.013541] ACPI: Reserving FACS table memory at [mem 0x6f76e000-0x6f76e03f] [ 0.013543] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc46b] [ 0.013544] ACPI: Reserving WD__ table memory at [mem 0x6fffb000-0x6fffb133] [ 0.013545] ACPI: Reserving SLIC table memory at [mem 0x6fffa000-0x6fffa023] [ 0.013547] ACPI: Reserving HPET table memory at [mem 0x6fff8000-0x6fff8037] [ 0.013548] ACPI: Reserving APIC table memory at [mem 0x6fff6000-0x6fff76dd] [ 0.013549] ACPI: Reserving MCFG table memory at [mem 0x6fff5000-0x6fff503b] [ 0.013550] ACPI: Reserving MIGT table memory at [mem 0x6fff4000-0x6fff403f] [ 0.013552] ACPI: Reserving MSCT table memory at [mem 0x6fff3000-0x6fff308f] [ 0.013553] ACPI: Reserving PCAT table memory at [mem 0x6fff2000-0x6fff2087] [ 0.013554] ACPI: Reserving PCCT table memory at [mem 0x6fff1000-0x6fff106d] [ 0.013556] ACPI: Reserving RASF table memory at [mem 0x6fff0000-0x6fff002f] [ 0.013557] ACPI: Reserving SLIT table memory at [mem 0x6ffef000-0x6ffef42b] [ 0.013558] ACPI: Reserving SRAT table memory at [mem 0x6ffec000-0x6ffeed2f] [ 0.013559] ACPI: Reserving SVOS table memory at [mem 0x6ffeb000-0x6ffeb031] [ 0.013561] ACPI: Reserving WSMT table memory at [mem 0x6ffea000-0x6ffea027] [ 0.013562] ACPI: Reserving OEM4 table memory at [mem 0x6fc53000-0x6fd001c0] [ 0.013563] ACPI: Reserving OEM1 table memory at [mem 0x6fc25000-0x6fc52970] [ 0.013565] ACPI: Reserving OEM2 table memory at [mem 0x6fbf2000-0x6fc240c8] [ 0.013566] ACPI: Reserving SSDT table memory at [mem 0x6fbba000-0x6fbf1464] [ 0.013568] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffdc93] [ 0.013569] ACPI: Reserving SSDT table memory at [mem 0x6fbb6000-0x6fbb957e] [ 0.013570] ACPI: Reserving SPCR table memory at [mem 0x6fbb5000-0x6fbb504f] [ 0.013572] ACPI: Reserving DMAR table memory at [mem 0x6fbb4000-0x6fbb417f] [ 0.013573] ACPI: Reserving HEST table memory at [mem 0x6fbb3000-0x6fbb317b] [ 0.013575] ACPI: Reserving BERT table memory at [mem 0x6fbb2000-0x6fbb202f] [ 0.013576] ACPI: Reserving ERST table memory at [mem 0x6fbb1000-0x6fbb122f] [ 0.013578] ACPI: Reserving EINJ table memory at [mem 0x6fbb0000-0x6fbb014f] [ 0.013591] ACPI: Local APIC address 0xfee00000 [ 0.013628] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.013630] SRAT: PXM 1 -> APIC 0x10 -> Node 1 [ 0.013631] SRAT: PXM 0 -> APIC 0x0e -> Node 0 [ 0.013632] SRAT: PXM 1 -> APIC 0x1e -> Node 1 [ 0.013634] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.013635] SRAT: PXM 1 -> APIC 0x12 -> Node 1 [ 0.013636] SRAT: PXM 0 -> APIC 0x0c -> Node 0 [ 0.013638] SRAT: PXM 1 -> APIC 0x1c -> Node 1 [ 0.013639] SRAT: PXM 0 -> APIC 0x04 -> Node 0 [ 0.013640] SRAT: PXM 1 -> APIC 0x14 -> Node 1 [ 0.013642] SRAT: PXM 0 -> APIC 0x0a -> Node 0 [ 0.013643] SRAT: PXM 1 -> APIC 0x1a -> Node 1 [ 0.013644] SRAT: PXM 0 -> APIC 0x06 -> Node 0 [ 0.013645] SRAT: PXM 1 -> APIC 0x16 -> Node 1 [ 0.013647] SRAT: PXM 0 -> APIC 0x08 -> Node 0 [ 0.013648] SRAT: PXM 1 -> APIC 0x18 -> Node 1 [ 0.013649] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.013650] SRAT: PXM 1 -> APIC 0x11 -> Node 1 [ 0.013651] SRAT: PXM 0 -> APIC 0x0f -> Node 0 [ 0.013652] SRAT: PXM 1 -> APIC 0x1f -> Node 1 [ 0.013653] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.013655] SRAT: PXM 1 -> APIC 0x13 -> Node 1 [ 0.013656] SRAT: PXM 0 -> APIC 0x0d -> Node 0 [ 0.013657] SRAT: PXM 1 -> APIC 0x1d -> Node 1 [ 0.013658] SRAT: PXM 0 -> APIC 0x05 -> Node 0 [ 0.013659] SRAT: PXM 1 -> APIC 0x15 -> Node 1 [ 0.013660] SRAT: PXM 0 -> APIC 0x0b -> Node 0 [ 0.013662] SRAT: PXM 1 -> APIC 0x1b -> Node 1 [ 0.013663] SRAT: PXM 0 -> APIC 0x07 -> Node 0 [ 0.013664] SRAT: PXM 1 -> APIC 0x17 -> Node 1 [ 0.013665] SRAT: PXM 0 -> APIC 0x09 -> Node 0 [ 0.013666] SRAT: PXM 1 -> APIC 0x19 -> Node 1 [ 0.013685] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] [ 0.013687] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff] [ 0.013688] ACPI: SRAT: Node 1 PXM 1 [mem 0x880000000-0x107fffffff] [ 0.013698] NUMA: Initialized distance table, cnt=2 [ 0.013700] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff] [ 0.013714] NODE_DATA(0) allocated [mem 0x87ffd6000-0x87fffffff] [ 0.013742] NODE_DATA(1) allocated [mem 0x107ffd5000-0x107fffefff] [ 0.014174] Zone ranges: [ 0.014175] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014178] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.014180] Normal [mem 0x0000000100000000-0x000000107fffffff] [ 0.014182] Device empty [ 0.014183] Movable zone start for each node [ 0.014187] Early memory node ranges [ 0.014189] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.014190] node 0: [mem 0x0000000000100000-0x0000000068bfefff] [ 0.014192] node 0: [mem 0x000000006ffff000-0x000000006fffffff] [ 0.014193] node 0: [mem 0x0000000100000000-0x000000087fffffff] [ 0.014197] node 1: [mem 0x0000000880000000-0x000000107fffffff] [ 0.014201] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] [ 0.014203] On node 0 totalpages: 8293276 [ 0.014205] DMA zone: 64 pages used for memmap [ 0.014206] DMA zone: 21 pages reserved [ 0.014207] DMA zone: 3996 pages, LIFO batch:0 [ 0.014208] DMA32 zone: 6640 pages used for memmap [ 0.014209] DMA32 zone: 424960 pages, LIFO batch:63 [ 0.014210] Normal zone: 122880 pages used for memmap [ 0.014211] Normal zone: 7864320 pages, LIFO batch:63 [ 0.014212] Initmem setup node 1 [mem 0x0000000880000000-0x000000107fffffff] [ 0.014214] On node 1 totalpages: 8388608 [ 0.014215] Normal zone: 131072 pages used for memmap [ 0.014215] Normal zone: 8388608 pages, LIFO batch:63 [ 0.014219] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014260] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.019144] On node 0, zone DMA32: 29696 pages in unavailable ranges [ 0.020084] ACPI: PM-Timer IO Port: 0x508 [ 0.020088] ACPI: Local APIC address 0xfee00000 [ 0.020111] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) [ 0.020115] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.020136] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.020141] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-31 [ 0.020146] IOAPIC[2]: apic_id 10, version 32, address 0xfec08000, GSI 32-39 [ 0.020151] IOAPIC[3]: apic_id 11, version 32, address 0xfec10000, GSI 40-47 [ 0.020156] IOAPIC[4]: apic_id 12, version 32, address 0xfec18000, GSI 48-55 [ 0.020161] IOAPIC[5]: apic_id 15, version 32, address 0xfec20000, GSI 72-79 [ 0.020167] IOAPIC[6]: apic_id 16, version 32, address 0xfec28000, GSI 80-87 [ 0.020172] IOAPIC[7]: apic_id 17, version 32, address 0xfec30000, GSI 88-95 [ 0.020177] IOAPIC[8]: apic_id 18, version 32, address 0xfec38000, GSI 96-103 [ 0.020183] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.020185] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.020189] ACPI: IRQ0 used by override. [ 0.020190] ACPI: IRQ9 used by override. [ 0.020195] Using ACPI (MADT) for SMP configuration information [ 0.020197] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.020203] ACPI: SPCR: console: uart,io,0x2f8,115200 [ 0.020206] TSC deadline timer available [ 0.020208] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 0.020235] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.020237] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.020239] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.020240] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.020242] PM: hibernation: Registered nosave memory: [mem 0x68bff000-0x6ebfefff] [ 0.020243] PM: hibernation: Registered nosave memory: [mem 0x6ebff000-0x6f9fefff] [ 0.020245] PM: hibernation: Registered nosave memory: [mem 0x6f9ff000-0x6fffefff] [ 0.020247] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x8fffffff] [ 0.020248] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfcffffff] [ 0.020249] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.020251] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.020252] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.020253] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec7ffff] [ 0.020255] PM: hibernation: Registered nosave memory: [mem 0xfec80000-0xfed00fff] [ 0.020256] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.020257] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.020258] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfeffffff] [ 0.020259] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.020262] [mem 0x90000000-0xfcffffff] available for PCI devices [ 0.020264] Booting paravirtualized kernel on bare hardware [ 0.020268] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.025381] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2 [ 0.027624] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.027635] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.027637] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 24 26 28 30 [ 0.027648] pcpu-alloc: [1] 01 03 05 07 09 11 13 15 [1] 17 19 21 23 25 27 29 31 [ 0.027699] Built 2 zonelists, mobility grouping on. Total pages: 16421207 [ 0.027702] Policy zone: Normal [ 0.027704] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-30-amd64 root=UUID=56485174-9364-48e1-9955-f61345f29fd2 ro console=ttyS1,115200n8 raid0.default_layout=2 elevator=deadline [ 0.027782] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.027790] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.027791] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 0.027793] printk: log_buf_len min size: 131072 bytes [ 0.028244] printk: log_buf_len: 262144 bytes [ 0.028246] printk: early log buf free: 115384(88%) [ 0.028623] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.067210] Memory: 1875356K/66727536K available (12295K kernel code, 2537K rwdata, 7592K rodata, 2672K init, 17708K bss, 1206104K reserved, 0K cma-reserved) [ 0.067999] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2 [ 0.068033] Kernel/User page tables isolation: enabled [ 0.068098] ftrace: allocating 36669 entries in 144 pages [ 0.092385] ftrace: allocated 144 pages with 2 groups [ 0.093193] rcu: Hierarchical RCU implementation. [ 0.093195] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32. [ 0.093197] Rude variant of Tasks RCU enabled. [ 0.093198] Tracing variant of Tasks RCU enabled. [ 0.093200] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.093202] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.098083] NR_IRQS: 524544, nr_irqs: 2040, preallocated irqs: 16 [ 0.098420] random: crng init done [ 0.102762] Console: colour VGA+ 80x25 [ 1.498081] printk: console [ttyS1] enabled [ 1.502312] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 1.513491] ACPI: Core revision 20200925 [ 1.521283] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 1.530344] APIC: Switch to symmetric I/O mode setup [ 1.535311] DMAR: Host address width 46 [ 1.539157] DMAR: DRHD base: 0x000000d37fc000 flags: 0x0 [ 1.544469] DMAR: dmar0: reg_base_addr d37fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.552462] DMAR: DRHD base: 0x000000e0ffc000 flags: 0x0 [ 1.557775] DMAR: dmar1: reg_base_addr e0ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.565767] DMAR: DRHD base: 0x000000ee7fc000 flags: 0x0 [ 1.571079] DMAR: dmar2: reg_base_addr ee7fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.579065] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0 [ 1.584378] DMAR: dmar3: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.592374] DMAR: DRHD base: 0x000000aaffc000 flags: 0x0 [ 1.597683] DMAR: dmar4: reg_base_addr aaffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.605672] DMAR: DRHD base: 0x000000b87fc000 flags: 0x0 [ 1.610982] DMAR: dmar5: reg_base_addr b87fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.618978] DMAR: DRHD base: 0x000000c5ffc000 flags: 0x0 [ 1.624289] DMAR: dmar6: reg_base_addr c5ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.632276] DMAR: DRHD base: 0x0000009d7fc000 flags: 0x1 [ 1.637586] DMAR: dmar7: reg_base_addr 9d7fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df [ 1.645574] DMAR: RMRR base: 0x0000006a6f9000 end: 0x0000006abf8fff [ 1.651833] DMAR: RMRR base: 0x0000006f760000 end: 0x0000006f762fff [ 1.658096] DMAR-IR: IOAPIC id 12 under DRHD base 0xc5ffc000 IOMMU 6 [ 1.664537] DMAR-IR: IOAPIC id 11 under DRHD base 0xb87fc000 IOMMU 5 [ 1.670968] DMAR-IR: IOAPIC id 10 under DRHD base 0xaaffc000 IOMMU 4 [ 1.677400] DMAR-IR: IOAPIC id 18 under DRHD base 0xfbffc000 IOMMU 3 [ 1.683832] DMAR-IR: IOAPIC id 17 under DRHD base 0xee7fc000 IOMMU 2 [ 1.690267] DMAR-IR: IOAPIC id 16 under DRHD base 0xe0ffc000 IOMMU 1 [ 1.696700] DMAR-IR: IOAPIC id 15 under DRHD base 0xd37fc000 IOMMU 0 [ 1.703133] DMAR-IR: IOAPIC id 8 under DRHD base 0x9d7fc000 IOMMU 7 [ 1.709478] DMAR-IR: IOAPIC id 9 under DRHD base 0x9d7fc000 IOMMU 7 [ 1.715827] DMAR-IR: HPET id 0 under DRHD base 0x9d7fc000 [ 1.721222] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 1.721223] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 1.738076] DMAR-IR: Enabled IRQ remapping in xapic mode [ 1.743376] x2apic: IRQ remapping doesn't support X2APIC mode [ 1.749130] Switched APIC routing to physical flat. [ 1.755068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.777741] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e4530a99b6, max_idle_ns: 440795257976 ns [ 1.788231] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.00 BogoMIPS (lpj=8400000) [ 1.792275] mce: CPU0: Thermal monitoring enabled (TM1) [ 1.796287] process: using mwait in idle threads [ 1.800231] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 1.804229] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 1.808234] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.812231] Spectre V2 : Mitigation: IBRS [ 1.816229] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.820229] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.824229] RETBleed: Mitigation: IBRS [ 1.828231] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.832229] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 1.836230] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 1.840240] MDS: Mitigation: Clear CPU buffers [ 1.844229] TAA: Mitigation: Clear CPU buffers [ 1.848229] MMIO Stale Data: Mitigation: Clear CPU buffers [ 1.852240] GDS: Mitigation: Microcode [ 1.856243] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.860229] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.864229] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.868229] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 1.872230] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 1.876229] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 1.880229] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 1.884229] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 1.888230] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 1.892233] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.896230] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 1.900230] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 1.904229] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64 [ 1.908229] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512 [ 1.912229] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024 [ 1.916229] x86/fpu: xstate_offset[9]: 2560, xstate_sizes[9]: 8 [ 1.920230] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format. [ 1.948705] Freeing SMP alternatives memory: 32K [ 1.954592] pid_max: default: 32768 minimum: 301 [ 1.956315] LSM: Security Framework initializing [ 1.960246] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.964269] AppArmor: AppArmor initialized [ 1.968230] TOMOYO Linux initialized [ 1.997491] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc) [ 2.012711] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc) [ 2.016613] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc) [ 2.020570] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc) [ 2.028418] smpboot: CPU0: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz (family: 0x6, model: 0x55, stepping: 0x4) [ 2.032466] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 2.036232] ... version: 4 [ 2.040229] ... bit width: 48 [ 2.044229] ... generic registers: 4 [ 2.048229] ... value mask: 0000ffffffffffff [ 2.052229] ... max period: 00007fffffffffff [ 2.056229] ... fixed-purpose events: 3 [ 2.060229] ... event mask: 000000070000000f [ 2.064397] rcu: Hierarchical SRCU implementation. [ 2.071780] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 2.072885] smp: Bringing up secondary CPUs ... [ 2.076420] x86: Booting SMP configuration: [ 2.080233] .... node #1, CPUs: #1 [ 1.525818] smpboot: CPU 1 Converting physical 0 to logical die 1 [ 2.177888] .... node #0, CPUs: #2 [ 2.184231] .... node #1, CPUs: #3 [ 2.188231] .... node #0, CPUs: #4 [ 2.192232] .... node #1, CPUs: #5 [ 2.196231] .... node #0, CPUs: #6 [ 2.200231] .... node #1, CPUs: #7 [ 2.204232] .... node #0, CPUs: #8 [ 2.208233] .... node #1, CPUs: #9 [ 2.212231] .... node #0, CPUs: #10 [ 2.216232] .... node #1, CPUs: #11 [ 2.220231] .... node #0, CPUs: #12 [ 2.224232] .... node #1, CPUs: #13 [ 2.228231] .... node #0, CPUs: #14 [ 2.232231] .... node #1, CPUs: #15 [ 2.236231] .... node #0, CPUs: #16 [ 2.239380] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 2.244234] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 2.248230] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 2.253966] .... node #1, CPUs: #17 [ 2.260231] .... node #0, CPUs: #18 [ 2.264232] .... node #1, CPUs: #19 [ 2.268232] .... node #0, CPUs: #20 [ 2.272231] .... node #1, CPUs: #21 [ 2.276232] .... node #0, CPUs: #22 [ 2.280232] .... node #1, CPUs: #23 [ 2.284231] .... node #0, CPUs: #24 [ 2.288231] .... node #1, CPUs: #25 [ 2.292232] .... node #0, CPUs: #26 [ 2.296232] .... node #1, CPUs: #27 [ 2.300231] .... node #0, CPUs: #28 [ 2.304232] .... node #1, CPUs: #29 [ 2.308232] .... node #0, CPUs: #30 [ 2.312232] .... node #1, CPUs: #31 [ 2.315030] smp: Brought up 2 nodes, 32 CPUs [ 2.320230] smpboot: Max logical packages: 2 [ 2.324230] smpboot: Total of 32 processors activated (134428.78 BogoMIPS) [ 2.392307] node 0 deferred pages initialised in 60ms [ 2.396248] node 1 deferred pages initialised in 64ms [ 2.409114] devtmpfs: initialized [ 2.412315] x86/mm: Memory block size: 2048MB [ 2.416809] PM: Registering ACPI NVS region [mem 0x6ebff000-0x6f9fefff] (14680064 bytes) [ 2.420697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 2.424401] futex hash table entries: 8192 (order: 7, 524288 bytes, vmalloc) [ 2.428404] pinctrl core: initialized pinctrl subsystem [ 2.432573] NET: Registered protocol family 16 [ 2.437235] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 2.441057] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 2.445056] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 2.448240] audit: initializing netlink subsys (disabled) [ 2.452246] audit: type=2000 audit(1719513087.832:1): state=initialized audit_enabled=0 res=1 [ 2.452387] thermal_sys: Registered thermal governor 'fair_share' [ 2.456232] thermal_sys: Registered thermal governor 'bang_bang' [ 2.460230] thermal_sys: Registered thermal governor 'step_wise' [ 2.464231] thermal_sys: Registered thermal governor 'user_space' [ 2.468229] thermal_sys: Registered thermal governor 'power_allocator' [ 2.472257] cpuidle: using governor ladder [ 2.480246] cpuidle: using governor menu [ 2.484235] Detected 1 PCC Subspaces [ 2.487828] Registering PCC driver as Mailbox controller [ 2.488305] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 2.492231] ACPI: bus type PCI registered [ 2.496231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 2.504391] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 2.512234] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 2.520247] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 2.532913] PCI: Using configuration type 1 for base access [ 2.536239] PCI: Dell System detected, enabling pci=bfsort. [ 2.545451] Kprobes globally optimized [ 2.552275] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 2.556231] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 2.717428] ACPI: Added _OSI(Module Device) [ 2.720231] ACPI: Added _OSI(Processor Device) [ 2.728230] ACPI: Added _OSI(3.0 _SCP Extensions) [ 2.732230] ACPI: Added _OSI(Processor Aggregator Device) [ 2.736230] ACPI: Added _OSI(Linux-Dell-Video) [ 2.740230] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 2.744230] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 2.857189] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 2.873081] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 2.897504] ACPI: Dynamic OEM Table Load: [ 2.942599] ACPI: Dynamic OEM Table Load: [ 2.970260] ACPI: Dynamic OEM Table Load: [ 3.159970] ACPI: Interpreter enabled [ 3.160253] ACPI: (supports S0 S5) [ 3.163652] ACPI: Using IOAPIC for interrupt routing [ 3.172382] HEST: Table parsing has been initialized. [ 3.176944] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 3.184232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.204304] ACPI: Enabled 5 GPEs in block 00 to 7F [ 3.276187] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-16]) [ 3.284236] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.292339] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR] [ 3.300327] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 3.308230] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.318178] PCI host bridge to bus 0000:00 [ 3.324231] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.328230] pci_bus 0000:00: root bus resource [io 0x1000-0x3fff window] [ 3.336230] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.344230] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 3.352230] pci_bus 0000:00: root bus resource [mem 0xfe010000-0xfe010fff window] [ 3.360230] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9d7fffff window] [ 3.364230] pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window] [ 3.372230] pci_bus 0000:00: root bus resource [bus 00-16] [ 3.380253] pci 0000:00:00.0: [8086:2020] type 00 class 0x060000 [ 3.385126] pci 0000:00:05.0: [8086:2024] type 00 class 0x088000 [ 3.393087] pci 0000:00:05.2: [8086:2025] type 00 class 0x088000 [ 3.401066] pci 0000:00:05.4: [8086:2026] type 00 class 0x080020 [ 3.404249] pci 0000:00:05.4: reg 0x10: [mem 0x93020000-0x93020fff] [ 3.413096] pci 0000:00:08.0: [8086:2014] type 00 class 0x088000 [ 3.421066] pci 0000:00:08.1: [8086:2015] type 00 class 0x110100 [ 3.425038] pci 0000:00:08.2: [8086:2016] type 00 class 0x088000 [ 3.433079] pci 0000:00:11.0: [8086:a1ec] type 00 class 0xff0000 [ 3.440232] pci 0000:00:11.0: device has non-compliant BARs; disabling IO/MEM decoding [ 3.449087] pci 0000:00:11.5: [8086:a1d2] type 00 class 0x010601 [ 3.452254] pci 0000:00:11.5: reg 0x10: [mem 0x93016000-0x93017fff] [ 3.460245] pci 0000:00:11.5: reg 0x14: [mem 0x9301f000-0x9301f0ff] [ 3.468244] pci 0000:00:11.5: reg 0x18: [io 0x2068-0x206f] [ 3.472244] pci 0000:00:11.5: reg 0x1c: [io 0x2074-0x2077] [ 3.476244] pci 0000:00:11.5: reg 0x20: [io 0x2040-0x205f] [ 3.484244] pci 0000:00:11.5: reg 0x24: [mem 0x92f80000-0x92ffffff] [ 3.488284] pci 0000:00:11.5: PME# supported from D3hot [ 3.497100] pci 0000:00:14.0: [8086:a1af] type 00 class 0x0c0330 [ 3.500263] pci 0000:00:14.0: reg 0x10: [mem 0x93000000-0x9300ffff 64bit] [ 3.508337] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.517062] pci 0000:00:14.2: [8086:a1b1] type 00 class 0x118000 [ 3.520262] pci 0000:00:14.2: reg 0x10: [mem 0x9301c000-0x9301cfff 64bit] [ 3.529130] pci 0000:00:16.0: [8086:a1ba] type 00 class 0x078000 [ 3.536268] pci 0000:00:16.0: reg 0x10: [mem 0x9301b000-0x9301bfff 64bit] [ 3.540357] pci 0000:00:16.0: PME# supported from D3hot [ 3.549029] pci 0000:00:16.1: [8086:a1bb] type 00 class 0x078000 [ 3.552268] pci 0000:00:16.1: reg 0x10: [mem 0x9301a000-0x9301afff 64bit] [ 3.560357] pci 0000:00:16.1: PME# supported from D3hot [ 3.565033] pci 0000:00:16.4: [8086:a1be] type 00 class 0x078000 [ 3.572272] pci 0000:00:16.4: reg 0x10: [mem 0x93019000-0x93019fff 64bit] [ 3.580359] pci 0000:00:16.4: PME# supported from D3hot [ 3.585032] pci 0000:00:17.0: [8086:a182] type 00 class 0x010601 [ 3.592254] pci 0000:00:17.0: reg 0x10: [mem 0x93014000-0x93015fff] [ 3.596244] pci 0000:00:17.0: reg 0x14: [mem 0x9301e000-0x9301e0ff] [ 3.604244] pci 0000:00:17.0: reg 0x18: [io 0x2060-0x2067] [ 3.608244] pci 0000:00:17.0: reg 0x1c: [io 0x2070-0x2073] [ 3.616244] pci 0000:00:17.0: reg 0x20: [io 0x2020-0x203f] [ 3.620244] pci 0000:00:17.0: reg 0x24: [mem 0x92f00000-0x92f7ffff] [ 3.628279] pci 0000:00:17.0: PME# supported from D3hot [ 3.633057] pci 0000:00:1c.0: [8086:a190] type 01 class 0x060400 [ 3.641064] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.648376] pci 0000:00:1c.4: [8086:a194] type 01 class 0x060400 [ 3.652336] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 3.661116] pci 0000:00:1c.5: [8086:a195] type 01 class 0x060400 [ 3.664337] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 3.673113] pci 0000:00:1f.0: [8086:a1c1] type 00 class 0x060100 [ 3.681205] pci 0000:00:1f.2: [8086:a1a1] type 00 class 0x058000 [ 3.684256] pci 0000:00:1f.2: reg 0x10: [mem 0x93010000-0x93013fff] [ 3.693139] pci 0000:00:1f.4: [8086:a1a3] type 00 class 0x0c0500 [ 3.700265] pci 0000:00:1f.4: reg 0x10: [mem 0x93018000-0x930180ff 64bit] [ 3.704276] pci 0000:00:1f.4: reg 0x20: [io 0x2000-0x201f] [ 3.713043] pci 0000:00:1f.5: [8086:a1a4] type 00 class 0x0c8000 [ 3.716257] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 3.725152] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.728234] pci 0000:00:1c.0: bridge window [mem 0x92a00000-0x92dfffff] [ 3.736295] pci 0000:02:00.0: [1556:be00] type 01 class 0x060400 [ 3.744492] pci 0000:00:1c.4: PCI bridge to [bus 02-03] [ 3.748233] pci 0000:00:1c.4: bridge window [mem 0x92000000-0x928fffff] [ 3.756233] pci 0000:00:1c.4: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 3.764265] pci_bus 0000:03: extended config space not accessible [ 3.768257] pci 0000:03:00.0: [102b:0536] type 00 class 0x030000 [ 3.776260] pci 0000:03:00.0: reg 0x10: [mem 0x91000000-0x91ffffff pref] [ 3.780248] pci 0000:03:00.0: reg 0x14: [mem 0x92808000-0x9280bfff] [ 3.788247] pci 0000:03:00.0: reg 0x18: [mem 0x92000000-0x927fffff] [ 3.792415] pci 0000:02:00.0: PCI bridge to [bus 03] [ 3.800237] pci 0000:02:00.0: bridge window [mem 0x92000000-0x928fffff] [ 3.804235] pci 0000:02:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 3.812325] pci 0000:04:00.0: [14e4:165f] type 00 class 0x020000 [ 3.820269] pci 0000:04:00.0: reg 0x10: [mem 0x92e30000-0x92e3ffff 64bit pref] [ 3.828258] pci 0000:04:00.0: reg 0x18: [mem 0x92e40000-0x92e4ffff 64bit pref] [ 3.836256] pci 0000:04:00.0: reg 0x20: [mem 0x92e50000-0x92e5ffff 64bit pref] [ 3.840247] pci 0000:04:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] [ 3.848333] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 3.856288] pci 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.5 (capable of 8.000 Gb/s with 5.0 GT/s PCIe x2 link) [ 3.868381] pci 0000:04:00.1: [14e4:165f] type 00 class 0x020000 [ 3.876269] pci 0000:04:00.1: reg 0x10: [mem 0x92e00000-0x92e0ffff 64bit pref] [ 3.884256] pci 0000:04:00.1: reg 0x18: [mem 0x92e10000-0x92e1ffff 64bit pref] [ 3.888258] pci 0000:04:00.1: reg 0x20: [mem 0x92e20000-0x92e2ffff 64bit pref] [ 3.896248] pci 0000:04:00.1: reg 0x30: [mem 0xfffc0000-0xffffffff pref] [ 3.904332] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 3.908396] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 3.916236] pci 0000:00:1c.5: bridge window [mem 0x92e00000-0x92efffff 64bit pref] [ 3.924258] pci_bus 0000:00: on NUMA node 0 [ 3.924605] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.928318] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 10 11 12 14 15) [ 3.936319] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 3.944317] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.952318] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.956317] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 10 11 12 14 15) [ 3.964316] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 3.972316] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 3.980659] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 17-39]) [ 3.984233] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.992386] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR] [ 4.000399] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 4.008230] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration [ 4.016440] PCI host bridge to bus 0000:17 [ 4.020231] pci_bus 0000:17: root bus resource [io 0x4000-0x5fff window] [ 4.028230] pci_bus 0000:17: root bus resource [mem 0x9d800000-0xaaffffff window] [ 4.036230] pci_bus 0000:17: root bus resource [mem 0x384000000000-0x387fffffffff window] [ 4.044230] pci_bus 0000:17: root bus resource [bus 17-39] [ 4.048243] pci 0000:17:05.0: [8086:2034] type 00 class 0x088000 [ 4.056369] pci 0000:17:05.2: [8086:2035] type 00 class 0x088000 [ 4.060362] pci 0000:17:05.4: [8086:2036] type 00 class 0x080020 [ 4.068249] pci 0000:17:05.4: reg 0x10: [mem 0x9d800000-0x9d800fff] [ 4.076381] pci 0000:17:08.0: [8086:208d] type 00 class 0x088000 [ 4.080349] pci 0000:17:08.1: [8086:208d] type 00 class 0x088000 [ 4.088332] pci 0000:17:08.2: [8086:208d] type 00 class 0x088000 [ 4.092330] pci 0000:17:08.3: [8086:208d] type 00 class 0x088000 [ 4.100336] pci 0000:17:08.4: [8086:208d] type 00 class 0x088000 [ 4.104330] pci 0000:17:08.5: [8086:208d] type 00 class 0x088000 [ 4.112330] pci 0000:17:08.6: [8086:208d] type 00 class 0x088000 [ 4.116332] pci 0000:17:08.7: [8086:208d] type 00 class 0x088000 [ 4.124330] pci 0000:17:09.0: [8086:208d] type 00 class 0x088000 [ 4.128350] pci 0000:17:09.1: [8086:208d] type 00 class 0x088000 [ 4.136339] pci 0000:17:0e.0: [8086:208e] type 00 class 0x088000 [ 4.140345] pci 0000:17:0e.1: [8086:208e] type 00 class 0x088000 [ 4.148337] pci 0000:17:0e.2: [8086:208e] type 00 class 0x088000 [ 4.152331] pci 0000:17:0e.3: [8086:208e] type 00 class 0x088000 [ 4.160329] pci 0000:17:0e.4: [8086:208e] type 00 class 0x088000 [ 4.164330] pci 0000:17:0e.5: [8086:208e] type 00 class 0x088000 [ 4.172330] pci 0000:17:0e.6: [8086:208e] type 00 class 0x088000 [ 4.176330] pci 0000:17:0e.7: [8086:208e] type 00 class 0x088000 [ 4.184330] pci 0000:17:0f.0: [8086:208e] type 00 class 0x088000 [ 4.188347] pci 0000:17:0f.1: [8086:208e] type 00 class 0x088000 [ 4.196350] pci 0000:17:1d.0: [8086:2054] type 00 class 0x088000 [ 4.204345] pci 0000:17:1d.1: [8086:2055] type 00 class 0x088000 [ 4.208335] pci 0000:17:1d.2: [8086:2056] type 00 class 0x088000 [ 4.216342] pci 0000:17:1d.3: [8086:2057] type 00 class 0x088000 [ 4.220334] pci 0000:17:1e.0: [8086:2080] type 00 class 0x088000 [ 4.228345] pci 0000:17:1e.1: [8086:2081] type 00 class 0x088000 [ 4.232331] pci 0000:17:1e.2: [8086:2082] type 00 class 0x088000 [ 4.240334] pci 0000:17:1e.3: [8086:2083] type 00 class 0x088000 [ 4.244342] pci 0000:17:1e.4: [8086:2084] type 00 class 0x088000 [ 4.252332] pci 0000:17:1e.5: [8086:2085] type 00 class 0x088000 [ 4.256332] pci 0000:17:1e.6: [8086:2086] type 00 class 0x088000 [ 4.264330] pci_bus 0000:17: on NUMA node 0 [ 4.264454] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 3a-5c]) [ 4.268232] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.280373] acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR] [ 4.288375] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 4.292230] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration [ 4.304431] PCI host bridge to bus 0000:3a [ 4.308231] pci_bus 0000:3a: root bus resource [io 0x6000-0x7fff window] [ 4.312230] pci_bus 0000:3a: root bus resource [mem 0xab000000-0xb87fffff window] [ 4.320231] pci_bus 0000:3a: root bus resource [mem 0x388000000000-0x38bfffffffff window] [ 4.328230] pci_bus 0000:3a: root bus resource [bus 3a-5c] [ 4.336243] pci 0000:3a:05.0: [8086:2034] type 00 class 0x088000 [ 4.340357] pci 0000:3a:05.2: [8086:2035] type 00 class 0x088000 [ 4.348353] pci 0000:3a:05.4: [8086:2036] type 00 class 0x080020 [ 4.352248] pci 0000:3a:05.4: reg 0x10: [mem 0xab000000-0xab000fff] [ 4.360375] pci 0000:3a:08.0: [8086:2066] type 00 class 0x088000 [ 4.364367] pci 0000:3a:09.0: [8086:2066] type 00 class 0x088000 [ 4.372372] pci 0000:3a:0a.0: [8086:2040] type 00 class 0x088000 [ 4.376360] pci 0000:3a:0a.1: [8086:2041] type 00 class 0x088000 [ 4.384346] pci 0000:3a:0a.2: [8086:2042] type 00 class 0x088000 [ 4.388342] pci 0000:3a:0a.3: [8086:2043] type 00 class 0x088000 [ 4.396342] pci 0000:3a:0a.4: [8086:2044] type 00 class 0x088000 [ 4.400342] pci 0000:3a:0a.5: [8086:2045] type 00 class 0x088000 [ 4.408344] pci 0000:3a:0a.6: [8086:2046] type 00 class 0x088000 [ 4.412341] pci 0000:3a:0a.7: [8086:2047] type 00 class 0x088000 [ 4.420354] pci 0000:3a:0b.0: [8086:2048] type 00 class 0x088000 [ 4.424357] pci 0000:3a:0b.1: [8086:2049] type 00 class 0x088000 [ 4.432341] pci 0000:3a:0b.2: [8086:204a] type 00 class 0x088000 [ 4.440344] pci 0000:3a:0b.3: [8086:204b] type 00 class 0x088000 [ 4.444346] pci 0000:3a:0c.0: [8086:2040] type 00 class 0x088000 [ 4.452357] pci 0000:3a:0c.1: [8086:2041] type 00 class 0x088000 [ 4.456342] pci 0000:3a:0c.2: [8086:2042] type 00 class 0x088000 [ 4.464343] pci 0000:3a:0c.3: [8086:2043] type 00 class 0x088000 [ 4.468357] pci 0000:3a:0c.4: [8086:2044] type 00 class 0x088000 [ 4.476344] pci 0000:3a:0c.5: [8086:2045] type 00 class 0x088000 [ 4.480342] pci 0000:3a:0c.6: [8086:2046] type 00 class 0x088000 [ 4.488343] pci 0000:3a:0c.7: [8086:2047] type 00 class 0x088000 [ 4.492347] pci 0000:3a:0d.0: [8086:2048] type 00 class 0x088000 [ 4.500362] pci 0000:3a:0d.1: [8086:2049] type 00 class 0x088000 [ 4.504346] pci 0000:3a:0d.2: [8086:204a] type 00 class 0x088000 [ 4.512343] pci 0000:3a:0d.3: [8086:204b] type 00 class 0x088000 [ 4.516363] pci_bus 0000:3a: on NUMA node 0 [ 4.516472] ACPI: PCI Root Bridge [PC03] (domain 0000 [bus 5d-7f]) [ 4.524232] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.532377] acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR] [ 4.540375] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 4.548230] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 4.556459] PCI host bridge to bus 0000:5d [ 4.560231] pci_bus 0000:5d: root bus resource [io 0x8000-0x9fff window] [ 4.568231] pci_bus 0000:5d: root bus resource [mem 0xb8800000-0xc5ffffff window] [ 4.576230] pci_bus 0000:5d: root bus resource [mem 0x38c000000000-0x38ffffffffff window] [ 4.584230] pci_bus 0000:5d: root bus resource [bus 5d-7f] [ 4.588243] pci 0000:5d:05.0: [8086:2034] type 00 class 0x088000 [ 4.596358] pci 0000:5d:05.2: [8086:2035] type 00 class 0x088000 [ 4.600353] pci 0000:5d:05.4: [8086:2036] type 00 class 0x080020 [ 4.608249] pci 0000:5d:05.4: reg 0x10: [mem 0xb8800000-0xb8800fff] [ 4.612377] pci 0000:5d:0e.0: [8086:2058] type 00 class 0x110100 [ 4.620359] pci 0000:5d:0e.1: [8086:2059] type 00 class 0x088000 [ 4.624343] pci 0000:5d:0f.0: [8086:2058] type 00 class 0x110100 [ 4.632357] pci 0000:5d:0f.1: [8086:2059] type 00 class 0x088000 [ 4.636344] pci 0000:5d:12.0: [8086:204c] type 00 class 0x110100 [ 4.644365] pci 0000:5d:12.1: [8086:204d] type 00 class 0x110100 [ 4.648323] pci 0000:5d:12.2: [8086:204e] type 00 class 0x088000 [ 4.656325] pci 0000:5d:15.0: [8086:2018] type 00 class 0x088000 [ 4.660342] pci 0000:5d:16.0: [8086:2018] type 00 class 0x088000 [ 4.668338] pci 0000:5d:16.4: [8086:2018] type 00 class 0x088000 [ 4.676326] pci_bus 0000:5d: on NUMA node 0 [ 4.676508] ACPI: PCI Root Bridge [PC06] (domain 0000 [bus 80-84]) [ 4.680232] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.688372] acpi PNP0A08:06: _OSC: platform does not support [SHPCHotplug AER LTR] [ 4.696377] acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 4.704230] acpi PNP0A08:06: FADT indicates ASPM is unsupported, using BIOS configuration [ 4.712274] acpi PNP0A08:06: host bridge window [io 0x0000 window] (ignored, not CPU addressable) [ 4.724334] PCI host bridge to bus 0000:80 [ 4.728231] pci_bus 0000:80: root bus resource [mem 0xc6000000-0xd37fffff window] [ 4.732230] pci_bus 0000:80: root bus resource [mem 0x390000000000-0x393fffffffff window] [ 4.740230] pci_bus 0000:80: root bus resource [bus 80-84] [ 4.748254] pci 0000:80:05.0: [8086:2024] type 00 class 0x088000 [ 4.752365] pci 0000:80:05.2: [8086:2025] type 00 class 0x088000 [ 4.760351] pci 0000:80:05.4: [8086:2026] type 00 class 0x080020 [ 4.764248] pci 0000:80:05.4: reg 0x10: [mem 0xc6000000-0xc6000fff] [ 4.772375] pci 0000:80:08.0: [8086:2014] type 00 class 0x088000 [ 4.776351] pci 0000:80:08.1: [8086:2015] type 00 class 0x110100 [ 4.784322] pci 0000:80:08.2: [8086:2016] type 00 class 0x088000 [ 4.792340] pci_bus 0000:80: on NUMA node 1 [ 4.792443] ACPI: PCI Root Bridge [PC07] (domain 0000 [bus 85-ad]) [ 4.796232] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.804370] acpi PNP0A08:07: _OSC: platform does not support [SHPCHotplug AER LTR] [ 4.812375] acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 4.820231] acpi PNP0A08:07: FADT indicates ASPM is unsupported, using BIOS configuration [ 4.828410] PCI host bridge to bus 0000:85 [ 4.832230] pci_bus 0000:85: root bus resource [io 0xa000-0xbfff window] [ 4.840230] pci_bus 0000:85: root bus resource [mem 0xd3800000-0xe0ffffff window] [ 4.848230] pci_bus 0000:85: root bus resource [mem 0x394000000000-0x397fffffffff window] [ 4.856230] pci_bus 0000:85: root bus resource [bus 85-ad] [ 4.860241] pci 0000:85:05.0: [8086:2034] type 00 class 0x088000 [ 4.868357] pci 0000:85:05.2: [8086:2035] type 00 class 0x088000 [ 4.872356] pci 0000:85:05.4: [8086:2036] type 00 class 0x080020 [ 4.880249] pci 0000:85:05.4: reg 0x10: [mem 0xd3800000-0xd3800fff] [ 4.884375] pci 0000:85:08.0: [8086:208d] type 00 class 0x088000 [ 4.892342] pci 0000:85:08.1: [8086:208d] type 00 class 0x088000 [ 4.896336] pci 0000:85:08.2: [8086:208d] type 00 class 0x088000 [ 4.904327] pci 0000:85:08.3: [8086:208d] type 00 class 0x088000 [ 4.912327] pci 0000:85:08.4: [8086:208d] type 00 class 0x088000 [ 4.916327] pci 0000:85:08.5: [8086:208d] type 00 class 0x088000 [ 4.924327] pci 0000:85:08.6: [8086:208d] type 00 class 0x088000 [ 4.928327] pci 0000:85:08.7: [8086:208d] type 00 class 0x088000 [ 4.936327] pci 0000:85:09.0: [8086:208d] type 00 class 0x088000 [ 4.940347] pci 0000:85:09.1: [8086:208d] type 00 class 0x088000 [ 4.948339] pci 0000:85:0e.0: [8086:208e] type 00 class 0x088000 [ 4.952342] pci 0000:85:0e.1: [8086:208e] type 00 class 0x088000 [ 4.960327] pci 0000:85:0e.2: [8086:208e] type 00 class 0x088000 [ 4.964326] pci 0000:85:0e.3: [8086:208e] type 00 class 0x088000 [ 4.972328] pci 0000:85:0e.4: [8086:208e] type 00 class 0x088000 [ 4.976327] pci 0000:85:0e.5: [8086:208e] type 00 class 0x088000 [ 4.984327] pci 0000:85:0e.6: [8086:208e] type 00 class 0x088000 [ 4.988327] pci 0000:85:0e.7: [8086:208e] type 00 class 0x088000 [ 4.996334] pci 0000:85:0f.0: [8086:208e] type 00 class 0x088000 [ 5.000343] pci 0000:85:0f.1: [8086:208e] type 00 class 0x088000 [ 5.008338] pci 0000:85:1d.0: [8086:2054] type 00 class 0x088000 [ 5.012345] pci 0000:85:1d.1: [8086:2055] type 00 class 0x088000 [ 5.020327] pci 0000:85:1d.2: [8086:2056] type 00 class 0x088000 [ 5.024329] pci 0000:85:1d.3: [8086:2057] type 00 class 0x088000 [ 5.032330] pci 0000:85:1e.0: [8086:2080] type 00 class 0x088000 [ 5.036343] pci 0000:85:1e.1: [8086:2081] type 00 class 0x088000 [ 5.044338] pci 0000:85:1e.2: [8086:2082] type 00 class 0x088000 [ 5.052329] pci 0000:85:1e.3: [8086:2083] type 00 class 0x088000 [ 5.056327] pci 0000:85:1e.4: [8086:2084] type 00 class 0x088000 [ 5.064330] pci 0000:85:1e.5: [8086:2085] type 00 class 0x088000 [ 5.068327] pci 0000:85:1e.6: [8086:2086] type 00 class 0x088000 [ 5.076327] pci_bus 0000:85: on NUMA node 1 [ 5.076461] ACPI: PCI Root Bridge [PC08] (domain 0000 [bus ae-d6]) [ 5.080232] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 5.088370] acpi PNP0A08:08: _OSC: platform does not support [SHPCHotplug AER LTR] [ 5.096374] acpi PNP0A08:08: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 5.104230] acpi PNP0A08:08: FADT indicates ASPM is unsupported, using BIOS configuration [ 5.112438] PCI host bridge to bus 0000:ae [ 5.116231] pci_bus 0000:ae: root bus resource [io 0xc000-0xdfff window] [ 5.124231] pci_bus 0000:ae: root bus resource [mem 0xe1000000-0xee7fffff window] [ 5.132230] pci_bus 0000:ae: root bus resource [mem 0x398000000000-0x39bfffffffff window] [ 5.140230] pci_bus 0000:ae: root bus resource [bus ae-d6] [ 5.144241] pci 0000:ae:05.0: [8086:2034] type 00 class 0x088000 [ 5.152350] pci 0000:ae:05.2: [8086:2035] type 00 class 0x088000 [ 5.156347] pci 0000:ae:05.4: [8086:2036] type 00 class 0x080020 [ 5.164248] pci 0000:ae:05.4: reg 0x10: [mem 0xe1000000-0xe1000fff] [ 5.168381] pci 0000:ae:08.0: [8086:2066] type 00 class 0x088000 [ 5.176355] pci 0000:ae:09.0: [8086:2066] type 00 class 0x088000 [ 5.184356] pci 0000:ae:0a.0: [8086:2040] type 00 class 0x088000 [ 5.188352] pci 0000:ae:0a.1: [8086:2041] type 00 class 0x088000 [ 5.196338] pci 0000:ae:0a.2: [8086:2042] type 00 class 0x088000 [ 5.200338] pci 0000:ae:0a.3: [8086:2043] type 00 class 0x088000 [ 5.208339] pci 0000:ae:0a.4: [8086:2044] type 00 class 0x088000 [ 5.212336] pci 0000:ae:0a.5: [8086:2045] type 00 class 0x088000 [ 5.220346] pci 0000:ae:0a.6: [8086:2046] type 00 class 0x088000 [ 5.224338] pci 0000:ae:0a.7: [8086:2047] type 00 class 0x088000 [ 5.232336] pci 0000:ae:0b.0: [8086:2048] type 00 class 0x088000 [ 5.236361] pci 0000:ae:0b.1: [8086:2049] type 00 class 0x088000 [ 5.244339] pci 0000:ae:0b.2: [8086:204a] type 00 class 0x088000 [ 5.248338] pci 0000:ae:0b.3: [8086:204b] type 00 class 0x088000 [ 5.256340] pci 0000:ae:0c.0: [8086:2040] type 00 class 0x088000 [ 5.260350] pci 0000:ae:0c.1: [8086:2041] type 00 class 0x088000 [ 5.268346] pci 0000:ae:0c.2: [8086:2042] type 00 class 0x088000 [ 5.272337] pci 0000:ae:0c.3: [8086:2043] type 00 class 0x088000 [ 5.280336] pci 0000:ae:0c.4: [8086:2044] type 00 class 0x088000 [ 5.284338] pci 0000:ae:0c.5: [8086:2045] type 00 class 0x088000 [ 5.292336] pci 0000:ae:0c.6: [8086:2046] type 00 class 0x088000 [ 5.300336] pci 0000:ae:0c.7: [8086:2047] type 00 class 0x088000 [ 5.304338] pci 0000:ae:0d.0: [8086:2048] type 00 class 0x088000 [ 5.312355] pci 0000:ae:0d.1: [8086:2049] type 00 class 0x088000 [ 5.316344] pci 0000:ae:0d.2: [8086:204a] type 00 class 0x088000 [ 5.324337] pci 0000:ae:0d.3: [8086:204b] type 00 class 0x088000 [ 5.328347] pci_bus 0000:ae: on NUMA node 1 [ 5.328459] ACPI: PCI Root Bridge [PC09] (domain 0000 [bus d7-ff]) [ 5.336232] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 5.344374] acpi PNP0A08:09: _OSC: platform does not support [SHPCHotplug AER LTR] [ 5.352377] acpi PNP0A08:09: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 5.360230] acpi PNP0A08:09: FADT indicates ASPM is unsupported, using BIOS configuration [ 5.368366] PCI host bridge to bus 0000:d7 [ 5.372231] pci_bus 0000:d7: root bus resource [io 0xe000-0xffff window] [ 5.380230] pci_bus 0000:d7: root bus resource [mem 0xee800000-0xfbffffff window] [ 5.384230] pci_bus 0000:d7: root bus resource [mem 0x39c000000000-0x39ffffffffff window] [ 5.396230] pci_bus 0000:d7: root bus resource [bus d7-ff] [ 5.400242] pci 0000:d7:05.0: [8086:2034] type 00 class 0x088000 [ 5.404351] pci 0000:d7:05.2: [8086:2035] type 00 class 0x088000 [ 5.412347] pci 0000:d7:05.4: [8086:2036] type 00 class 0x080020 [ 5.416248] pci 0000:d7:05.4: reg 0x10: [mem 0xee800000-0xee800fff] [ 5.424370] pci 0000:d7:0e.0: [8086:2058] type 00 class 0x110100 [ 5.432354] pci 0000:d7:0e.1: [8086:2059] type 00 class 0x088000 [ 5.436344] pci 0000:d7:0f.0: [8086:2058] type 00 class 0x110100 [ 5.444358] pci 0000:d7:0f.1: [8086:2059] type 00 class 0x088000 [ 5.448342] pci 0000:d7:12.0: [8086:204c] type 00 class 0x110100 [ 5.456348] pci 0000:d7:12.1: [8086:204d] type 00 class 0x110100 [ 5.460319] pci 0000:d7:12.2: [8086:204e] type 00 class 0x088000 [ 5.468322] pci 0000:d7:15.0: [8086:2018] type 00 class 0x088000 [ 5.472338] pci 0000:d7:16.0: [8086:2018] type 00 class 0x088000 [ 5.480334] pci 0000:d7:16.4: [8086:2018] type 00 class 0x088000 [ 5.484322] pci_bus 0000:d7: on NUMA node 1 [ 5.485129] iommu: Default domain type: Translated [ 5.492283] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 5.496228] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 5.504272] pci 0000:03:00.0: vgaarb: bridge control possible [ 5.512230] vgaarb: loaded [ 5.515113] EDAC MC: Ver: 3.0.0 [ 5.516464] NetLabel: Initializing [ 5.519809] NetLabel: domain hash size = 128 [ 5.524230] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 5.532247] NetLabel: unlabeled traffic allowed by default [ 5.536230] PCI: Using ACPI for IRQ routing [ 5.543923] PCI: pci_cache_line_size set to 64 bytes [ 5.544132] Expanded resource Reserved due to conflict with PNP0003:00 [ 5.552232] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 5.552233] e820: reserve RAM buffer [mem 0x68bff000-0x6bffffff] [ 5.554392] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 5.560230] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 5.568268] clocksource: Switched to clocksource tsc-early [ 5.587894] VFS: Disk quotas dquot_6.6.0 [ 5.591870] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.598955] AppArmor: AppArmor Filesystem Enabled [ 5.603669] pnp: PnP ACPI init [ 5.612613] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 5.612775] system 00:01: [io 0x0500-0x05fe] has been reserved [ 5.618681] system 00:01: [io 0x0400-0x047f] has been reserved [ 5.624582] system 00:01: [io 0x0600-0x061f] has been reserved [ 5.630489] system 00:01: [io 0x0ca0-0x0ca5] has been reserved [ 5.636392] system 00:01: [io 0x0880-0x0883] has been reserved [ 5.642299] system 00:01: [io 0x0800-0x081f] has been reserved [ 5.648205] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 5.654803] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 5.661399] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 5.668000] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 5.674596] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 5.681193] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 5.687790] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 5.694389] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.694646] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.694860] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 5.695017] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved [ 5.701615] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved [ 5.708211] system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved [ 5.714807] system 00:04: [mem 0xfe000000-0xfe00ffff] has been reserved [ 5.721406] system 00:04: [mem 0xfe011000-0xfe01ffff] has been reserved [ 5.728002] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved [ 5.734603] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 5.741196] system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved [ 5.747797] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.748133] system 00:05: [io 0x1000-0x10fe] has been reserved [ 5.754041] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 5.754879] pnp: PnP ACPI: found 6 devices [ 5.765563] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 5.774533] NET: Registered protocol family 2 [ 5.779584] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc) [ 5.790121] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, vmalloc) [ 5.800312] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc) [ 5.809424] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc) [ 5.817002] TCP: Hash tables configured (established 524288 bind 65536) [ 5.824019] UDP hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc) [ 5.831496] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, vmalloc) [ 5.839192] NET: Registered protocol family 1 [ 5.843550] NET: Registered protocol family 44 [ 5.847999] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window [ 5.857886] pci 0000:04:00.1: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window [ 5.867783] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 5.875943] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 5.887392] pci 0000:00:1c.0: BAR 15: assigned [mem 0x380000000000-0x3800001fffff 64bit pref] [ 5.895892] pci 0000:00:1c.5: BAR 14: assigned [mem 0x90000000-0x900fffff] [ 5.902747] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 5.908912] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 5.913865] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 5.919953] pci 0000:00:1c.0: bridge window [mem 0x92a00000-0x92dfffff] [ 5.926727] pci 0000:00:1c.0: bridge window [mem 0x380000000000-0x3800001fffff 64bit pref] [ 5.935154] pci 0000:02:00.0: PCI bridge to [bus 03] [ 5.940116] pci 0000:02:00.0: bridge window [mem 0x92000000-0x928fffff] [ 5.946892] pci 0000:02:00.0: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 5.954627] pci 0000:00:1c.4: PCI bridge to [bus 02-03] [ 5.959854] pci 0000:00:1c.4: bridge window [mem 0x92000000-0x928fffff] [ 5.966629] pci 0000:00:1c.4: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 5.974367] pci 0000:04:00.0: BAR 6: assigned [mem 0x90000000-0x9003ffff pref] [ 5.981579] pci 0000:04:00.1: BAR 6: assigned [mem 0x90040000-0x9007ffff pref] [ 5.988788] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 5.993748] pci 0000:00:1c.5: bridge window [mem 0x90000000-0x900fffff] [ 6.000526] pci 0000:00:1c.5: bridge window [mem 0x92e00000-0x92efffff 64bit pref] [ 6.008261] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 6.014431] pci_bus 0000:00: resource 5 [io 0x1000-0x3fff window] [ 6.020595] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 6.027454] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c7fff window] [ 6.034307] pci_bus 0000:00: resource 8 [mem 0xfe010000-0xfe010fff window] [ 6.041165] pci_bus 0000:00: resource 9 [mem 0x90000000-0x9d7fffff window] [ 6.048023] pci_bus 0000:00: resource 10 [mem 0x380000000000-0x383fffffffff window] [ 6.055657] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 6.061217] pci_bus 0000:01: resource 1 [mem 0x92a00000-0x92dfffff] [ 6.067467] pci_bus 0000:01: resource 2 [mem 0x380000000000-0x3800001fffff 64bit pref] [ 6.075361] pci_bus 0000:02: resource 1 [mem 0x92000000-0x928fffff] [ 6.081612] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 6.088816] pci_bus 0000:03: resource 1 [mem 0x92000000-0x928fffff] [ 6.095066] pci_bus 0000:03: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 6.102272] pci_bus 0000:04: resource 1 [mem 0x90000000-0x900fffff] [ 6.108529] pci_bus 0000:04: resource 2 [mem 0x92e00000-0x92efffff 64bit pref] [ 6.115882] pci_bus 0000:17: resource 4 [io 0x4000-0x5fff window] [ 6.122051] pci_bus 0000:17: resource 5 [mem 0x9d800000-0xaaffffff window] [ 6.128907] pci_bus 0000:17: resource 6 [mem 0x384000000000-0x387fffffffff window] [ 6.136479] pci_bus 0000:3a: resource 4 [io 0x6000-0x7fff window] [ 6.142647] pci_bus 0000:3a: resource 5 [mem 0xab000000-0xb87fffff window] [ 6.149502] pci_bus 0000:3a: resource 6 [mem 0x388000000000-0x38bfffffffff window] [ 6.157061] pci_bus 0000:5d: resource 4 [io 0x8000-0x9fff window] [ 6.163224] pci_bus 0000:5d: resource 5 [mem 0xb8800000-0xc5ffffff window] [ 6.170081] pci_bus 0000:5d: resource 6 [mem 0x38c000000000-0x38ffffffffff window] [ 6.177638] pci_bus 0000:80: resource 4 [mem 0xc6000000-0xd37fffff window] [ 6.184493] pci_bus 0000:80: resource 5 [mem 0x390000000000-0x393fffffffff window] [ 6.192058] pci_bus 0000:85: resource 4 [io 0xa000-0xbfff window] [ 6.198226] pci_bus 0000:85: resource 5 [mem 0xd3800000-0xe0ffffff window] [ 6.205082] pci_bus 0000:85: resource 6 [mem 0x394000000000-0x397fffffffff window] [ 6.212651] pci_bus 0000:ae: resource 4 [io 0xc000-0xdfff window] [ 6.218819] pci_bus 0000:ae: resource 5 [mem 0xe1000000-0xee7fffff window] [ 6.225678] pci_bus 0000:ae: resource 6 [mem 0x398000000000-0x39bfffffffff window] [ 6.233234] pci_bus 0000:d7: resource 4 [io 0xe000-0xffff window] [ 6.239400] pci_bus 0000:d7: resource 5 [mem 0xee800000-0xfbffffff window] [ 6.246255] pci_bus 0000:d7: resource 6 [mem 0x39c000000000-0x39ffffffffff window] [ 6.255137] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 6.263473] pci 0000:17:05.0: disabled boot interrupts on device [8086:2034] [ 6.270553] pci 0000:3a:05.0: disabled boot interrupts on device [8086:2034] [ 6.277628] pci 0000:5d:05.0: disabled boot interrupts on device [8086:2034] [ 6.284693] pci 0000:85:05.0: disabled boot interrupts on device [8086:2034] [ 6.291778] pci 0000:ae:05.0: disabled boot interrupts on device [8086:2034] [ 6.298853] pci 0000:d7:05.0: disabled boot interrupts on device [8086:2034] [ 6.305900] PCI: CLS 0 bytes, default 64 [ 6.309891] Trying to unpack rootfs image as initramfs... [ 6.844497] Freeing initrd memory: 36732K [ 6.848798] DMAR: No ATSR found [ 6.852453] DMAR: dmar7: Using Queued invalidation [ 6.857344] pci 0000:00:00.0: Adding to iommu group 0 [ 6.862422] pci 0000:00:05.0: Adding to iommu group 1 [ 6.867494] pci 0000:00:05.2: Adding to iommu group 2 [ 6.872569] pci 0000:00:05.4: Adding to iommu group 3 [ 6.877645] pci 0000:00:08.0: Adding to iommu group 4 [ 6.882754] pci 0000:00:08.1: Adding to iommu group 5 [ 6.887831] pci 0000:00:08.2: Adding to iommu group 6 [ 6.892961] pci 0000:00:11.0: Adding to iommu group 7 [ 6.898039] pci 0000:00:11.5: Adding to iommu group 7 [ 6.903175] pci 0000:00:14.0: Adding to iommu group 8 [ 6.908252] pci 0000:00:14.2: Adding to iommu group 8 [ 6.913411] pci 0000:00:16.0: Adding to iommu group 9 [ 6.918490] pci 0000:00:16.1: Adding to iommu group 9 [ 6.923566] pci 0000:00:16.4: Adding to iommu group 9 [ 6.928642] pci 0000:00:17.0: Adding to iommu group 10 [ 6.933838] pci 0000:00:1c.0: Adding to iommu group 11 [ 6.939001] pci 0000:00:1c.4: Adding to iommu group 12 [ 6.944163] pci 0000:00:1c.5: Adding to iommu group 13 [ 6.949434] pci 0000:00:1f.0: Adding to iommu group 14 [ 6.954599] pci 0000:00:1f.2: Adding to iommu group 14 [ 6.959760] pci 0000:00:1f.4: Adding to iommu group 14 [ 6.964920] pci 0000:00:1f.5: Adding to iommu group 14 [ 6.970083] pci 0000:02:00.0: Adding to iommu group 15 [ 6.975215] pci 0000:03:00.0: Adding to iommu group 15 [ 6.980437] pci 0000:04:00.0: Adding to iommu group 16 [ 6.985606] pci 0000:04:00.1: Adding to iommu group 16 [ 6.990765] pci 0000:17:05.0: Adding to iommu group 17 [ 6.995926] pci 0000:17:05.2: Adding to iommu group 18 [ 7.001088] pci 0000:17:05.4: Adding to iommu group 19 [ 7.006474] pci 0000:17:08.0: Adding to iommu group 20 [ 7.011640] pci 0000:17:08.1: Adding to iommu group 20 [ 7.016801] pci 0000:17:08.2: Adding to iommu group 20 [ 7.021963] pci 0000:17:08.3: Adding to iommu group 20 [ 7.027123] pci 0000:17:08.4: Adding to iommu group 20 [ 7.032284] pci 0000:17:08.5: Adding to iommu group 20 [ 7.037448] pci 0000:17:08.6: Adding to iommu group 20 [ 7.042610] pci 0000:17:08.7: Adding to iommu group 20 [ 7.047826] pci 0000:17:09.0: Adding to iommu group 21 [ 7.052995] pci 0000:17:09.1: Adding to iommu group 21 [ 7.058378] pci 0000:17:0e.0: Adding to iommu group 22 [ 7.063545] pci 0000:17:0e.1: Adding to iommu group 22 [ 7.068716] pci 0000:17:0e.2: Adding to iommu group 22 [ 7.073885] pci 0000:17:0e.3: Adding to iommu group 22 [ 7.079049] pci 0000:17:0e.4: Adding to iommu group 22 [ 7.084218] pci 0000:17:0e.5: Adding to iommu group 22 [ 7.089378] pci 0000:17:0e.6: Adding to iommu group 22 [ 7.094542] pci 0000:17:0e.7: Adding to iommu group 22 [ 7.099761] pci 0000:17:0f.0: Adding to iommu group 23 [ 7.104927] pci 0000:17:0f.1: Adding to iommu group 23 [ 7.110205] pci 0000:17:1d.0: Adding to iommu group 24 [ 7.115372] pci 0000:17:1d.1: Adding to iommu group 24 [ 7.120540] pci 0000:17:1d.2: Adding to iommu group 24 [ 7.125705] pci 0000:17:1d.3: Adding to iommu group 24 [ 7.131065] pci 0000:17:1e.0: Adding to iommu group 25 [ 7.136237] pci 0000:17:1e.1: Adding to iommu group 25 [ 7.141406] pci 0000:17:1e.2: Adding to iommu group 25 [ 7.146581] pci 0000:17:1e.3: Adding to iommu group 25 [ 7.151747] pci 0000:17:1e.4: Adding to iommu group 25 [ 7.156918] pci 0000:17:1e.5: Adding to iommu group 25 [ 7.162089] pci 0000:17:1e.6: Adding to iommu group 25 [ 7.167251] pci 0000:3a:05.0: Adding to iommu group 26 [ 7.172413] pci 0000:3a:05.2: Adding to iommu group 27 [ 7.177580] pci 0000:3a:05.4: Adding to iommu group 28 [ 7.182743] pci 0000:3a:08.0: Adding to iommu group 29 [ 7.187900] pci 0000:3a:09.0: Adding to iommu group 30 [ 7.193063] pci 0000:3a:0a.0: Adding to iommu group 31 [ 7.198225] pci 0000:3a:0a.1: Adding to iommu group 32 [ 7.203388] pci 0000:3a:0a.2: Adding to iommu group 33 [ 7.208549] pci 0000:3a:0a.3: Adding to iommu group 34 [ 7.213710] pci 0000:3a:0a.4: Adding to iommu group 35 [ 7.218875] pci 0000:3a:0a.5: Adding to iommu group 36 [ 7.224035] pci 0000:3a:0a.6: Adding to iommu group 37 [ 7.229196] pci 0000:3a:0a.7: Adding to iommu group 38 [ 7.234357] pci 0000:3a:0b.0: Adding to iommu group 39 [ 7.239521] pci 0000:3a:0b.1: Adding to iommu group 40 [ 7.244680] pci 0000:3a:0b.2: Adding to iommu group 41 [ 7.249848] pci 0000:3a:0b.3: Adding to iommu group 42 [ 7.255014] pci 0000:3a:0c.0: Adding to iommu group 43 [ 7.260176] pci 0000:3a:0c.1: Adding to iommu group 44 [ 7.265336] pci 0000:3a:0c.2: Adding to iommu group 45 [ 7.270499] pci 0000:3a:0c.3: Adding to iommu group 46 [ 7.275662] pci 0000:3a:0c.4: Adding to iommu group 47 [ 7.280827] pci 0000:3a:0c.5: Adding to iommu group 48 [ 7.285986] pci 0000:3a:0c.6: Adding to iommu group 49 [ 7.291147] pci 0000:3a:0c.7: Adding to iommu group 50 [ 7.296307] pci 0000:3a:0d.0: Adding to iommu group 51 [ 7.301473] pci 0000:3a:0d.1: Adding to iommu group 52 [ 7.306632] pci 0000:3a:0d.2: Adding to iommu group 53 [ 7.311797] pci 0000:3a:0d.3: Adding to iommu group 54 [ 7.316957] pci 0000:5d:05.0: Adding to iommu group 55 [ 7.322118] pci 0000:5d:05.2: Adding to iommu group 56 [ 7.327278] pci 0000:5d:05.4: Adding to iommu group 57 [ 7.332441] pci 0000:5d:0e.0: Adding to iommu group 58 [ 7.337603] pci 0000:5d:0e.1: Adding to iommu group 59 [ 7.342770] pci 0000:5d:0f.0: Adding to iommu group 60 [ 7.347936] pci 0000:5d:0f.1: Adding to iommu group 61 [ 7.353099] pci 0000:5d:12.0: Adding to iommu group 62 [ 7.358314] pci 0000:5d:12.1: Adding to iommu group 63 [ 7.363487] pci 0000:5d:12.2: Adding to iommu group 63 [ 7.368678] pci 0000:5d:15.0: Adding to iommu group 64 [ 7.373898] pci 0000:5d:16.0: Adding to iommu group 65 [ 7.379073] pci 0000:5d:16.4: Adding to iommu group 65 [ 7.384233] pci 0000:80:05.0: Adding to iommu group 66 [ 7.389396] pci 0000:80:05.2: Adding to iommu group 67 [ 7.394556] pci 0000:80:05.4: Adding to iommu group 68 [ 7.399718] pci 0000:80:08.0: Adding to iommu group 69 [ 7.404906] pci 0000:80:08.1: Adding to iommu group 70 [ 7.410069] pci 0000:80:08.2: Adding to iommu group 71 [ 7.415233] pci 0000:85:05.0: Adding to iommu group 72 [ 7.420393] pci 0000:85:05.2: Adding to iommu group 73 [ 7.425552] pci 0000:85:05.4: Adding to iommu group 74 [ 7.430939] pci 0000:85:08.0: Adding to iommu group 75 [ 7.436116] pci 0000:85:08.1: Adding to iommu group 75 [ 7.441295] pci 0000:85:08.2: Adding to iommu group 75 [ 7.446475] pci 0000:85:08.3: Adding to iommu group 75 [ 7.451655] pci 0000:85:08.4: Adding to iommu group 75 [ 7.456832] pci 0000:85:08.5: Adding to iommu group 75 [ 7.462003] pci 0000:85:08.6: Adding to iommu group 75 [ 7.467185] pci 0000:85:08.7: Adding to iommu group 75 [ 7.472402] pci 0000:85:09.0: Adding to iommu group 76 [ 7.477576] pci 0000:85:09.1: Adding to iommu group 76 [ 7.482964] pci 0000:85:0e.0: Adding to iommu group 77 [ 7.488143] pci 0000:85:0e.1: Adding to iommu group 77 [ 7.493322] pci 0000:85:0e.2: Adding to iommu group 77 [ 7.498502] pci 0000:85:0e.3: Adding to iommu group 77 [ 7.503681] pci 0000:85:0e.4: Adding to iommu group 77 [ 7.508859] pci 0000:85:0e.5: Adding to iommu group 77 [ 7.514038] pci 0000:85:0e.6: Adding to iommu group 77 [ 7.519219] pci 0000:85:0e.7: Adding to iommu group 77 [ 7.524437] pci 0000:85:0f.0: Adding to iommu group 78 [ 7.529613] pci 0000:85:0f.1: Adding to iommu group 78 [ 7.534887] pci 0000:85:1d.0: Adding to iommu group 79 [ 7.540067] pci 0000:85:1d.1: Adding to iommu group 79 [ 7.545243] pci 0000:85:1d.2: Adding to iommu group 79 [ 7.550424] pci 0000:85:1d.3: Adding to iommu group 79 [ 7.555780] pci 0000:85:1e.0: Adding to iommu group 80 [ 7.560955] pci 0000:85:1e.1: Adding to iommu group 80 [ 7.566137] pci 0000:85:1e.2: Adding to iommu group 80 [ 7.571315] pci 0000:85:1e.3: Adding to iommu group 80 [ 7.576492] pci 0000:85:1e.4: Adding to iommu group 80 [ 7.581674] pci 0000:85:1e.5: Adding to iommu group 80 [ 7.586851] pci 0000:85:1e.6: Adding to iommu group 80 [ 7.592014] pci 0000:ae:05.0: Adding to iommu group 81 [ 7.597176] pci 0000:ae:05.2: Adding to iommu group 82 [ 7.602336] pci 0000:ae:05.4: Adding to iommu group 83 [ 7.607499] pci 0000:ae:08.0: Adding to iommu group 84 [ 7.612661] pci 0000:ae:09.0: Adding to iommu group 85 [ 7.617828] pci 0000:ae:0a.0: Adding to iommu group 86 [ 7.622995] pci 0000:ae:0a.1: Adding to iommu group 87 [ 7.628160] pci 0000:ae:0a.2: Adding to iommu group 88 [ 7.633327] pci 0000:ae:0a.3: Adding to iommu group 89 [ 7.638488] pci 0000:ae:0a.4: Adding to iommu group 90 [ 7.643649] pci 0000:ae:0a.5: Adding to iommu group 91 [ 7.648814] pci 0000:ae:0a.6: Adding to iommu group 92 [ 7.653975] pci 0000:ae:0a.7: Adding to iommu group 93 [ 7.659135] pci 0000:ae:0b.0: Adding to iommu group 94 [ 7.664295] pci 0000:ae:0b.1: Adding to iommu group 95 [ 7.669457] pci 0000:ae:0b.2: Adding to iommu group 96 [ 7.674621] pci 0000:ae:0b.3: Adding to iommu group 97 [ 7.679781] pci 0000:ae:0c.0: Adding to iommu group 98 [ 7.684943] pci 0000:ae:0c.1: Adding to iommu group 99 [ 7.690104] pci 0000:ae:0c.2: Adding to iommu group 100 [ 7.695353] pci 0000:ae:0c.3: Adding to iommu group 101 [ 7.700603] pci 0000:ae:0c.4: Adding to iommu group 102 [ 7.705852] pci 0000:ae:0c.5: Adding to iommu group 103 [ 7.711111] pci 0000:ae:0c.6: Adding to iommu group 104 [ 7.716355] pci 0000:ae:0c.7: Adding to iommu group 105 [ 7.721605] pci 0000:ae:0d.0: Adding to iommu group 106 [ 7.726850] pci 0000:ae:0d.1: Adding to iommu group 107 [ 7.732099] pci 0000:ae:0d.2: Adding to iommu group 108 [ 7.737349] pci 0000:ae:0d.3: Adding to iommu group 109 [ 7.742600] pci 0000:d7:05.0: Adding to iommu group 110 [ 7.747846] pci 0000:d7:05.2: Adding to iommu group 111 [ 7.753095] pci 0000:d7:05.4: Adding to iommu group 112 [ 7.758341] pci 0000:d7:0e.0: Adding to iommu group 113 [ 7.763592] pci 0000:d7:0e.1: Adding to iommu group 114 [ 7.768838] pci 0000:d7:0f.0: Adding to iommu group 115 [ 7.774087] pci 0000:d7:0f.1: Adding to iommu group 116 [ 7.779337] pci 0000:d7:12.0: Adding to iommu group 117 [ 7.784640] pci 0000:d7:12.1: Adding to iommu group 118 [ 7.789907] pci 0000:d7:12.2: Adding to iommu group 118 [ 7.795188] pci 0000:d7:15.0: Adding to iommu group 119 [ 7.800486] pci 0000:d7:16.0: Adding to iommu group 120 [ 7.805758] pci 0000:d7:16.4: Adding to iommu group 120 [ 7.864694] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 7.871119] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 7.877543] software IO TLB: mapped [mem 0x0000000064bff000-0x0000000068bff000] (64MB) [ 7.887058] Initialise system trusted keyrings [ 7.891508] Key type blacklist registered [ 7.895612] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 7.903534] zbud: loaded [ 7.906382] integrity: Platform Keyring initialized [ 7.911255] Key type asymmetric registered [ 7.915346] Asymmetric key parser 'x509' registered [ 7.920217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 7.927649] io scheduler mq-deadline registered [ 7.933342] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 [ 7.939118] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 7.952927] pcieport 0000:00:1c.4: PME: Signaling with IRQ 25 [ 7.958944] pcieport 0000:00:1c.5: PME: Signaling with IRQ 26 [ 7.965160] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.971863] intel_idle: MWAIT substates: 0x2020 [ 7.972054] Monitor-Mwait will be used to enter C-1 state [ 7.972073] Monitor-Mwait will be used to enter C-2 state [ 7.972083] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 7.977207] intel_idle: v0.5.1 model 0x55 [ 7.978911] intel_idle: Local APIC timer is reliable in all C-states [ 7.983068] ERST: Error Record Serialization Table (ERST) support is initialized. [ 7.990538] pstore: Registered erst as persistent store backend [ 7.996754] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.003237] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 8.018636] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 8.033976] Linux agpgart interface v0.103 [ 8.038190] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 8.051259] i8042: PNP: No PS/2 controller found. [ 8.056135] mousedev: PS/2 mouse device common for all mice [ 8.061710] rtc_cmos 00:00: RTC can wake from S4 [ 8.066746] rtc_cmos 00:00: registered as rtc0 [ 8.071331] rtc_cmos 00:00: setting system clock to 2024-06-27T18:31:36 UTC (1719513096) [ 8.079420] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 8.086105] intel_pstate: Intel P-state driver initializing [ 8.095366] intel_pstate: HWP enabled [ 8.100658] ledtrig-cpu: registered to indicate activity on CPUs [ 8.107156] NET: Registered protocol family 10 [ 8.131668] Segment Routing with IPv6 [ 8.135378] mip6: Mobile IPv6 [ 8.138355] NET: Registered protocol family 17 [ 8.142921] mpls_gso: MPLS GSO support [ 8.155101] microcode: sig=0x50654, pf=0x1, revision=0x2007108 [ 8.162332] microcode: Microcode Update Driver: v2.2. [ 8.164729] resctrl: MB allocation detected [ 8.173962] IPI shorthand broadcast: enabled [ 8.178254] sched_clock: Marking stable (6656406185, 1521818976)->(8518490670, -340265509) [ 8.186833] registered taskstats version 1 [ 8.190925] Loading compiled-in X.509 certificates [ 8.243188] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 8.251928] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 8.262368] zswap: loaded using pool lzo/zbud [ 8.267305] Key type .fscrypt registered [ 8.271230] Key type fscrypt-provisioning registered [ 8.276380] pstore: Using crash dump compression: deflate [ 8.281779] AppArmor: AppArmor sha1 policy hashing enabled [ 8.290642] clk: Disabling unused clocks [ 8.296189] Freeing unused decrypted memory: 2036K [ 8.301864] Freeing unused kernel image (initmem) memory: 2672K [ 8.325952] Write protecting the kernel read-only data: 22528k [ 8.333460] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 8.340513] Freeing unused kernel image (rodata/data gap) memory: 600K [ 8.404994] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.411420] x86/mm: Checking user space page tables [ 8.461757] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 8.468186] Run /init as init process [ 8.471846] with arguments: [ 8.471847] /init [ 8.471847] with environment: [ 8.471848] HOME=/ [ 8.471849] TERM=linux [ 8.471850] BOOT_IMAGE=/boot/vmlinuz-5.10.0-30-amd64 [ 8.712211] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 8.720571] pps_core: LinuxPPS API ver. 1 registered [ 8.725543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 8.734975] lpc_ich 0000:00:1f.0: I/O space for ACPI uninitialized [ 8.741212] lpc_ich 0000:00:1f.0: No MFD cells added [ 8.750312] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 8.756097] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 8.762628] PTP clock support registered [ 8.762741] SCSI subsystem initialized [ 8.770367] ACPI: bus type USB registered [ 8.774423] usbcore: registered new interface driver usbfs [ 8.779909] usbcore: registered new interface driver hub [ 8.785242] usbcore: registered new device driver usb [ 8.787625] i2c i2c-0: 2/16 memory slots populated (from DMI) [ 8.796018] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 8.810219] libata version 3.00 loaded. [ 8.814402] ahci 0000:00:11.5: version 3.0 [ 8.820428] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.825689] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 8.833225] ahci 0000:00:11.5: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 8.841421] ahci 0000:00:11.5: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 8.852295] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 8.861411] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 8.868787] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.874177] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 8.881596] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 8.887971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.896211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.903432] usb usb1: Product: xHCI Host Controller [ 8.908296] usb usb1: Manufacturer: Linux 5.10.0-30-amd64 xhci-hcd [ 8.913914] tsc: Refined TSC clocksource calibration: 2095.077 MHz [ 8.914479] usb usb1: SerialNumber: 0000:00:14.0 [ 8.920723] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e33060eadb, max_idle_ns: 440795261188 ns [ 8.925607] hub 1-0:1.0: USB hub found [ 8.939137] clocksource: Switched to clocksource tsc [ 8.939224] hub 1-0:1.0: 16 ports detected [ 8.950719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.958978] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.966210] usb usb2: Product: xHCI Host Controller [ 8.971093] usb usb2: Manufacturer: Linux 5.10.0-30-amd64 xhci-hcd [ 8.977271] usb usb2: SerialNumber: 0000:00:14.0 [ 8.982656] hub 2-0:1.0: USB hub found [ 8.986438] scsi host0: ahci [ 8.989459] hub 2-0:1.0: 10 ports detected [ 8.993777] scsi host1: ahci [ 8.997000] scsi host2: ahci [ 9.000251] scsi host3: ahci [ 9.003557] scsi host4: ahci [ 9.006878] scsi host5: ahci [ 9.010353] ata1: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80100 irq 27 [ 9.017939] ata2: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80180 irq 27 [ 9.025511] ata3: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80200 irq 27 [ 9.033076] ata4: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80280 irq 27 [ 9.040642] ata5: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80300 irq 27 [ 9.048207] ata6: SATA max UDMA/133 abar m524288@0x92f80000 port 0x92f80380 irq 27 [ 9.056770] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 4c:d9:8f:66:2f:67 [ 9.067304] tg3 0000:04:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 9.077142] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 9.084969] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 9.091773] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 9.099948] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 9.130704] tg3 0000:04:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 4c:d9:8f:66:2f:68 [ 9.141242] tg3 0000:04:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 9.151080] tg3 0000:04:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 9.158911] tg3 0000:04:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 9.212606] scsi host6: ahci [ 9.216039] scsi host7: ahci [ 9.219522] scsi host8: ahci [ 9.222854] scsi host9: ahci [ 9.226212] scsi host10: ahci [ 9.229645] scsi host11: ahci [ 9.233052] scsi host12: ahci [ 9.236343] scsi host13: ahci [ 9.239416] ata7: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00100 irq 29 [ 9.246988] ata8: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00180 irq 29 [ 9.254552] ata9: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00200 irq 29 [ 9.262120] ata10: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00280 irq 29 [ 9.269787] ata11: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00300 irq 29 [ 9.277448] ata12: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00380 irq 29 [ 9.285100] ata13: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00400 irq 29 [ 9.292781] ata14: SATA max UDMA/133 abar m524288@0x92f00000 port 0x92f00480 irq 29 [ 9.300459] usb 1-14: new high-speed USB device number 2 using xhci_hcd [ 9.369519] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.375751] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.381972] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.388183] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.394387] ata2: SATA link down (SStatus 0 SControl 300) [ 9.399805] ata1: SATA link down (SStatus 0 SControl 300) [ 9.405516] ata5.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.412148] ata5.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.419031] ata3.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.425647] ata3.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.432534] ata4.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.439167] ata4.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.446083] ata6.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.452695] ata6.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.460012] ata3.00: configured for UDMA/133 [ 9.464303] ata4.00: configured for UDMA/133 [ 9.464747] scsi 2:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.468590] ata6.00: configured for UDMA/133 [ 9.468676] usb 1-14: New USB device found, idVendor=1604, idProduct=10c0, bcdDevice= 0.00 [ 9.468682] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.469347] hub 1-14:1.0: USB hub found [ 9.469374] hub 1-14:1.0: 4 ports detected [ 9.477332] scsi 3:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.481010] ata5.00: configured for UDMA/133 [ 9.517086] scsi 4:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.525899] scsi 5:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.610766] ata11: SATA link down (SStatus 0 SControl 300) [ 9.616300] ata12: SATA link down (SStatus 0 SControl 300) [ 9.621823] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.628030] ata13: SATA link down (SStatus 0 SControl 300) [ 9.633541] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.639743] ata14: SATA link down (SStatus 0 SControl 300) [ 9.645276] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.651480] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.657848] ata7.00: failed to read native max address (err_mask=0x1) [ 9.664285] ata7.00: HPA support seems broken, skipping HPA handling [ 9.670901] ata8.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.677521] ata8.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.684396] ata9.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.691013] ata9.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.697889] ata10.00: ATA-11: HFS1T9G32FEH-BA10A, DD01, max UDMA/133 [ 9.704593] ata10.00: 3750748848 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 9.712002] ata8.00: configured for UDMA/133 [ 9.716281] ata9.00: configured for UDMA/133 [ 9.720560] ata10.00: configured for UDMA/133 [ 9.725113] ata7.00: ATA-11: MZ7KH1T9HAJR0D3, HF56, max UDMA/133 [ 9.731468] ata7.00: 3750748848 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 9.740116] ata7.00: configured for UDMA/133 [ 9.744777] scsi 6:0:0:0: Direct-Access ATA MZ7KH1T9HAJR0D3 HF56 PQ: 0 ANSI: 5 [ 9.753531] scsi 7:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.762389] scsi 8:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.771265] scsi 9:0:0:0: Direct-Access ATA HFS1T9G32FEH-BA1 DD01 PQ: 0 ANSI: 5 [ 9.783403] tg3 0000:04:00.1 eno2: renamed from eth1 [ 9.802896] sd 8:0:0:0: [sdh] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802906] sd 6:0:0:0: [sde] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802935] sd 9:0:0:0: [sdg] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802941] sd 7:0:0:0: [sdf] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802944] sd 9:0:0:0: [sdg] 4096-byte physical blocks [ 9.802948] sd 7:0:0:0: [sdf] 4096-byte physical blocks [ 9.802961] sd 2:0:0:0: [sda] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802963] sd 9:0:0:0: [sdg] Write Protect is off [ 9.802965] sd 3:0:0:0: [sdb] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802967] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 9.802969] sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 9.802971] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 9.802975] sd 7:0:0:0: [sdf] Write Protect is off [ 9.802981] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 9.802987] sd 4:0:0:0: [sdc] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802992] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 9.802995] sd 5:0:0:0: [sdd] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 9.802997] sd 9:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.802999] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 9.803007] sd 3:0:0:0: [sdb] Write Protect is off [ 9.803009] sd 2:0:0:0: [sda] Write Protect is off [ 9.803012] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.803015] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 9.803023] sd 7:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.803028] sd 5:0:0:0: [sdd] Write Protect is off [ 9.803030] sd 4:0:0:0: [sdc] Write Protect is off [ 9.803033] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 9.803036] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.803052] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.803088] sd 5:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.803093] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.803095] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.810658] sd 8:0:0:0: [sdh] 4096-byte physical blocks [ 9.818387] sd 6:0:0:0: [sde] 4096-byte physical blocks [ 9.818397] sd 6:0:0:0: [sde] Write Protect is off [ 9.826150] sd 8:0:0:0: [sdh] Write Protect is off [ 9.833875] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 9.833908] sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9.839102] sd 8:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 9.839238] tg3 0000:04:00.0 eno1: renamed from eth0 [ 10.013936] sd 8:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.026850] sdg: sdg1 sdg2 [ 10.026967] sdf: sdf1 sdf2 [ 10.026968] sdc: sdc1 sdc2 [ 10.027018] sda: sda1 sda2 [ 10.027172] sdb: sdb1 sdb2 [ 10.030527] sdd: sdd1 sdd2 [ 10.050404] sde: sde1 sde2 [ 10.058388] sd 3:0:0:0: [sdb] Attached SCSI disk [ 10.058443] sd 4:0:0:0: [sdc] Attached SCSI disk [ 10.062018] sd 5:0:0:0: [sdd] Attached SCSI disk [ 10.062121] sd 2:0:0:0: [sda] Attached SCSI disk [ 10.062897] sdh: sdh1 sdh2 [ 10.086035] sd 9:0:0:0: [sdg] Attached SCSI disk [ 10.086264] sd 6:0:0:0: [sde] Attached SCSI disk [ 10.094197] sd 7:0:0:0: [sdf] Attached SCSI disk [ 10.102045] sd 8:0:0:0: [sdh] Attached SCSI disk [ 10.132949] md/raid10:md0: active with 4 out of 4 devices [ 10.133806] md: kicking non-fresh sde2 from array! [ 10.135734] md/raid10:md1: active with 4 out of 4 devices [ 10.136563] md1: detected capacity change from 0 to 3790495285248 [ 10.138428] md0: detected capacity change from 0 to 49962549248 [ 10.179698] md/raid10:md2: active with 3 out of 4 devices [ 10.192369] md2: detected capacity change from 0 to 3790495285248 [ 10.201901] usb 1-14.1: new high-speed USB device number 3 using xhci_hcd [ 10.310160] usb 1-14.1: New USB device found, idVendor=1604, idProduct=10c0, bcdDevice= 0.00 [ 10.318612] usb 1-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.326712] hub 1-14.1:1.0: USB hub found [ 10.330804] hub 1-14.1:1.0: 4 ports detected [ 10.361932] raid6: avx512x4 gen() 13749 MB/s [ 10.417970] usb 1-14.4: new high-speed USB device number 4 using xhci_hcd [ 10.433931] raid6: avx512x4 xor() 7057 MB/s [ 10.505932] raid6: avx512x2 gen() 17403 MB/s [ 10.522099] usb 1-14.4: New USB device found, idVendor=1604, idProduct=10c0, bcdDevice= 0.00 [ 10.530547] usb 1-14.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 10.538653] hub 1-14.4:1.0: USB hub found [ 10.542740] hub 1-14.4:1.0: 4 ports detected [ 10.577930] raid6: avx512x2 xor() 23914 MB/s [ 10.649931] raid6: avx512x1 gen() 17396 MB/s [ 10.721930] raid6: avx512x1 xor() 21562 MB/s [ 10.793935] raid6: avx2x4 gen() 17363 MB/s [ 10.865931] raid6: avx2x4 xor() 6706 MB/s [ 10.937931] raid6: avx2x2 gen() 17332 MB/s [ 11.009931] raid6: avx2x2 xor() 16125 MB/s [ 11.081931] raid6: avx2x1 gen() 13131 MB/s [ 11.153935] raid6: avx2x1 xor() 14800 MB/s [ 11.225933] raid6: sse2x4 gen() 9954 MB/s [ 11.297934] raid6: sse2x4 xor() 6388 MB/s [ 11.369934] raid6: sse2x2 gen() 11014 MB/s [ 11.441932] raid6: sse2x2 xor() 6569 MB/s [ 11.513931] raid6: sse2x1 gen() 9913 MB/s [ 11.585936] raid6: sse2x1 xor() 5093 MB/s [ 11.590213] raid6: using algorithm avx512x2 gen() 17403 MB/s [ 11.595881] raid6: .... xor() 23914 MB/s, rmw enabled [ 11.600933] raid6: using avx512x2 recovery algorithm [ 11.608523] xor: automatically using best checksumming function avx [ 11.617302] async_tx: api initialized (async) [ 16.801125] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 16.871562] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 16.975839] systemd[1]: Inserted module 'autofs4' [ 17.005196] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 17.046230] systemd[1]: Detected architecture x86-64. [ 17.066484] systemd[1]: Set hostname to . [ 17.242625] systemd[1]: Queued start job for default target Graphical Interface. [ 17.251676] systemd[1]: Created slice system-getty.slice. [ 17.274948] systemd[1]: Created slice system-modprobe.slice. [ 17.299399] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 17.322901] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 17.346798] systemd[1]: Created slice User and Session Slice. [ 17.370265] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 17.394251] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 17.418714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 17.446150] systemd[1]: Reached target Local Encrypted Volumes. [ 17.470132] systemd[1]: Reached target Host and Network Name Lookups. [ 17.494074] systemd[1]: Reached target Paths. [ 17.514091] systemd[1]: Reached target Remote File Systems. [ 17.534078] systemd[1]: Reached target Slices. [ 17.554092] systemd[1]: Reached target Swap. [ 17.575324] systemd[1]: Listening on Syslog Socket. [ 17.594371] systemd[1]: Listening on fsck to fsckd communication Socket. [ 17.618239] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 17.642639] systemd[1]: Listening on Journal Audit Socket. [ 17.666401] systemd[1]: Listening on Journal Socket (/dev/log). [ 17.690510] systemd[1]: Listening on Journal Socket. [ 17.710889] systemd[1]: Listening on udev Control Socket. [ 17.734404] systemd[1]: Listening on udev Kernel Socket. [ 17.756390] systemd[1]: Mounting Huge Pages File System... [ 17.780690] systemd[1]: Mounting POSIX Message Queue File System... [ 17.804531] systemd[1]: Mounting Kernel Debug File System... [ 17.828833] systemd[1]: Mounting Kernel Trace File System... [ 17.852738] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 17.880478] systemd[1]: Starting Load Kernel Module configfs... [ 17.904410] systemd[1]: Starting Load Kernel Module drm... [ 17.929072] systemd[1]: Starting Load Kernel Module fuse... [ 17.936653] ACPI: bus type drm_connector registered [ 17.953784] fuse: init (API version 7.32) [ 17.958871] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 17.968038] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 17.980360] systemd[1]: Starting Journal Service... [ 18.004185] systemd[1]: Starting Load Kernel Modules... [ 18.028125] systemd[1]: Starting Remount Root and Kernel File Systems... [ 18.041366] IPMI message handler: version 39.2 [ 18.046856] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro [ 18.052897] ipmi device interface [ 18.055167] systemd[1]: Starting Coldplug All udev Devices... [ 18.082964] systemd[1]: Mounted Huge Pages File System. [ 18.106477] systemd[1]: Mounted POSIX Message Queue File System. [ 18.130367] systemd[1]: Mounted Kernel Debug File System. [ 18.150273] systemd[1]: Started Journal Service. [ 18.348283] systemd-journald[556]: Received client request to flush runtime journal. [ 18.722031] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 18.745996] ACPI: Power Button [PWRF] [ 18.774381] ipmi_si: IPMI System Interface driver [ 18.774415] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 18.774420] ipmi_platform: ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10 [ 18.774421] ipmi_si: Adding SMBIOS-specified kcs state machine [ 18.774498] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 18.774526] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca8] regsize 1 spacing 4 irq 10 [ 18.846640] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 18.846645] ipmi_si: Adding ACPI-specified kcs state machine [ 18.846875] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10 [ 18.849233] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 18.851717] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 18.853499] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 18.853631] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 18.853732] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 18.853825] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 18.853939] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 18.854056] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 18.854186] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 18.854311] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 18.859936] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 18.859941] RAPL PMU: hw unit of domain package 2^-14 Joules [ 18.859943] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 18.860088] iTCO_vendor_support: vendor-support=0 [ 18.869204] cryptd: max_cpu_qlen set to 1000 [ 18.870405] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 18.870548] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 18.872923] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 18.879170] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 18.890446] mgag200 0000:03:00.0: vgaarb: deactivate vga console [ 18.892492] AVX2 version of gcm_enc/dec engaged. [ 18.892493] AES CTR mode by8 optimization enabled [ 18.896355] Console: switching to colour dummy device 80x25 [ 18.901175] [drm] Initialized mgag200 1.0.0 20110418 for 0000:03:00.0 on minor 0 [ 18.903295] fbcon: mgag200drmfb (fb0) is primary device [ 19.273838] Console: switching to colour frame buffer device 128x48 [ 19.290662] mgag200 0000:03:00.0: [drm] fb0: mgag200drmfb frame buffer device [ 19.467069] EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0: DEV 0000:3a:0a.0 (INTERRUPT) [ 19.467095] EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1: DEV 0000:3a:0c.0 (INTERRUPT) [ 19.467138] EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0: DEV 0000:ae:0a.0 (INTERRUPT) [ 19.467161] EDAC MC3: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1: DEV 0000:ae:0c.0 (INTERRUPT) [ 19.473099] intel_rapl_common: Found RAPL domain package [ 19.473108] intel_rapl_common: Found RAPL domain dram [ 19.473110] intel_rapl_common: DRAM domain energy unit 15300pj [ 19.473202] intel_rapl_common: Found RAPL domain package [ 19.473212] intel_rapl_common: Found RAPL domain dram [ 19.473216] intel_rapl_common: DRAM domain energy unit 15300pj [ 19.537938] ipmi_si IPI0001:00: The BMC does not support setting the recv irq bit, compensating, but the BMC needs to be fixed. [ 19.615657] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null) [ 19.674071] ipmi_si IPI0001:00: Using irq 10 [ 19.700527] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20) [ 19.711938] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null) [ 19.746127] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 19.750767] ipmi_ssif: IPMI SSIF Interface driver [ 20.708065] Process accounting resumed [ 23.463144] tg3 0000:04:00.0 eno1: Link is up at 1000 Mbps, full duplex [ 23.463168] tg3 0000:04:00.0 eno1: Flow control is off for TX and off for RX [ 23.463174] tg3 0000:04:00.0 eno1: EEE is disabled [ 23.463212] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 1239.404915] sde: sde1 sde2 [ 1239.670043] sde: sde1 sde2 [ 1239.673219] sde: sde1 sde2 [ 1315.980550] md: recovery of RAID array md2 [13812.638372] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [21862.348539] perf: interrupt took too long (3142 > 3137), lowering kernel.perf_event_max_sample_rate to 63500 [24231.621482] perf: interrupt took too long (3934 > 3927), lowering kernel.perf_event_max_sample_rate to 50750 [25790.093208] perf: interrupt took too long (5089 > 4917), lowering kernel.perf_event_max_sample_rate to 39250 [27931.521011] perf: interrupt took too long (6445 > 6361), lowering kernel.perf_event_max_sample_rate to 31000 [42826.024484] Process accounting resumed [91918.846548] md: md2: recovery done. [129225.739324] Process accounting resumed [215624.210055] Process accounting resumed [279184.045655] device-mapper: uevent: version 1.0.3 [279184.045766] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [281597.869748] ata7.00: exception Emask 0x0 SAct 0xffffffff SErr 0x0 action 0x6 frozen [281597.877517] ata7.00: failed command: READ FPDMA QUEUED [281597.882786] ata7.00: cmd 60/08:00:40:d0:e1/00:00:1a:00:00/40 tag 0 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281597.897901] ata7.00: status: { DRDY } [281597.901663] ata7.00: failed command: READ FPDMA QUEUED [281597.906905] ata7.00: cmd 60/08:08:50:d0:e1/00:00:1a:00:00/40 tag 1 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281597.922055] ata7.00: status: { DRDY } [281597.925845] ata7.00: failed command: READ FPDMA QUEUED [281597.931086] ata7.00: cmd 60/08:10:70:d0:e1/00:00:1a:00:00/40 tag 2 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281597.946236] ata7.00: status: { DRDY } [281597.949995] ata7.00: failed command: READ FPDMA QUEUED [281597.955221] ata7.00: cmd 60/08:18:a0:d0:e1/00:00:1a:00:00/40 tag 3 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281597.970337] ata7.00: status: { DRDY } [281597.974095] ata7.00: failed command: SEND FPDMA QUEUED [281597.979324] ata7.00: cmd 64/01:20:00:00:00/00:00:00:00:00/a0 tag 4 ncq dma 512 out res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281597.994437] ata7.00: status: { DRDY } [281597.998196] ata7.00: failed command: READ FPDMA QUEUED [281598.003433] ata7.00: cmd 60/08:28:c0:d0:e1/00:00:1a:00:00/40 tag 5 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.018606] ata7.00: status: { DRDY } [281598.022360] ata7.00: failed command: SEND FPDMA QUEUED [281598.027606] ata7.00: cmd 64/01:30:00:00:00/00:00:00:00:00/a0 tag 6 ncq dma 512 out res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.042769] ata7.00: status: { DRDY } [281598.046536] ata7.00: failed command: READ FPDMA QUEUED [281598.051793] ata7.00: cmd 60/08:38:e0:d0:e1/00:00:1a:00:00/40 tag 7 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.066932] ata7.00: status: { DRDY } [281598.070688] ata7.00: failed command: READ FPDMA QUEUED [281598.075921] ata7.00: cmd 60/08:40:f0:d0:e1/00:00:1a:00:00/40 tag 8 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.091083] ata7.00: status: { DRDY } [281598.094858] ata7.00: failed command: READ FPDMA QUEUED [281598.100088] ata7.00: cmd 60/08:48:00:d1:e1/00:00:1a:00:00/40 tag 9 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.115216] ata7.00: status: { DRDY } [281598.118970] ata7.00: failed command: READ FPDMA QUEUED [281598.124204] ata7.00: cmd 60/08:50:10:d1:e1/00:00:1a:00:00/40 tag 10 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.139397] ata7.00: status: { DRDY } [281598.143157] ata7.00: failed command: READ FPDMA QUEUED [281598.148407] ata7.00: cmd 60/08:58:30:d1:e1/00:00:1a:00:00/40 tag 11 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.163620] ata7.00: status: { DRDY } [281598.167369] ata7.00: failed command: READ FPDMA QUEUED [281598.172606] ata7.00: cmd 60/08:60:60:d1:e1/00:00:1a:00:00/40 tag 12 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.187800] ata7.00: status: { DRDY } [281598.191551] ata7.00: failed command: READ FPDMA QUEUED [281598.196778] ata7.00: cmd 60/08:68:80:d1:e1/00:00:1a:00:00/40 tag 13 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.211977] ata7.00: status: { DRDY } [281598.215752] ata7.00: failed command: READ FPDMA QUEUED [281598.220983] ata7.00: cmd 60/08:70:a0:d1:e1/00:00:1a:00:00/40 tag 14 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.236222] ata7.00: status: { DRDY } [281598.239990] ata7.00: failed command: READ FPDMA QUEUED [281598.245223] ata7.00: cmd 60/08:78:c0:d1:e1/00:00:1a:00:00/40 tag 15 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.260443] ata7.00: status: { DRDY } [281598.264194] ata7.00: failed command: READ FPDMA QUEUED [281598.269422] ata7.00: cmd 60/08:80:e0:d1:e1/00:00:1a:00:00/40 tag 16 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.284657] ata7.00: status: { DRDY } [281598.288425] ata7.00: failed command: READ FPDMA QUEUED [281598.293657] ata7.00: cmd 60/08:88:00:d2:e1/00:00:1a:00:00/40 tag 17 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.308855] ata7.00: status: { DRDY } [281598.312606] ata7.00: failed command: READ FPDMA QUEUED [281598.317835] ata7.00: cmd 60/08:90:20:d2:e1/00:00:1a:00:00/40 tag 18 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.333059] ata7.00: status: { DRDY } [281598.336812] ata7.00: failed command: READ FPDMA QUEUED [281598.342058] ata7.00: cmd 60/08:98:50:d2:e1/00:00:1a:00:00/40 tag 19 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.357264] ata7.00: status: { DRDY } [281598.361019] ata7.00: failed command: READ FPDMA QUEUED [281598.366246] ata7.00: cmd 60/08:a0:70:d2:e1/00:00:1a:00:00/40 tag 20 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.381447] ata7.00: status: { DRDY } [281598.385195] ata7.00: failed command: READ FPDMA QUEUED [281598.390429] ata7.00: cmd 60/08:a8:90:d2:e1/00:00:1a:00:00/40 tag 21 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.405626] ata7.00: status: { DRDY } [281598.409378] ata7.00: failed command: READ FPDMA QUEUED [281598.414617] ata7.00: cmd 60/08:b0:b0:d2:e1/00:00:1a:00:00/40 tag 22 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.429848] ata7.00: status: { DRDY } [281598.433601] ata7.00: failed command: READ FPDMA QUEUED [281598.438839] ata7.00: cmd 60/08:b8:20:d0:e1/00:00:1a:00:00/40 tag 23 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.454057] ata7.00: status: { DRDY } [281598.457817] ata7.00: failed command: READ FPDMA QUEUED [281598.463042] ata7.00: cmd 60/08:c0:d0:d2:e1/00:00:1a:00:00/40 tag 24 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.478256] ata7.00: status: { DRDY } [281598.482014] ata7.00: failed command: READ FPDMA QUEUED [281598.487248] ata7.00: cmd 60/08:c8:f0:d2:e1/00:00:1a:00:00/40 tag 25 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.502488] ata7.00: status: { DRDY } [281598.506250] ata7.00: failed command: READ FPDMA QUEUED [281598.511487] ata7.00: cmd 60/08:d0:10:d3:e1/00:00:1a:00:00/40 tag 26 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.526698] ata7.00: status: { DRDY } [281598.530453] ata7.00: failed command: READ FPDMA QUEUED [281598.535680] ata7.00: cmd 60/08:d8:40:d3:e1/00:00:1a:00:00/40 tag 27 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.550921] ata7.00: status: { DRDY } [281598.554673] ata7.00: failed command: SEND FPDMA QUEUED [281598.559901] ata7.00: cmd 64/01:e0:00:00:00/00:00:00:00:00/a0 tag 28 ncq dma 512 out res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.575093] ata7.00: status: { DRDY } [281598.578843] ata7.00: failed command: READ FPDMA QUEUED [281598.584073] ata7.00: cmd 60/08:e8:60:d3:e1/00:00:1a:00:00/40 tag 29 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.599273] ata7.00: status: { DRDY } [281598.603024] ata7.00: failed command: READ FPDMA QUEUED [281598.608253] ata7.00: cmd 60/08:f0:80:d3:e1/00:00:1a:00:00/40 tag 30 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.623445] ata7.00: status: { DRDY } [281598.627206] ata7.00: failed command: SEND FPDMA QUEUED [281598.632439] ata7.00: cmd 64/01:f8:00:00:00/00:00:00:00:00/a0 tag 31 ncq dma 512 out res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281598.647660] ata7.00: status: { DRDY } [281598.651421] ata7: hard resetting link [281598.964846] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [281598.968512] ata7.00: configured for UDMA/133 [281598.968738] ata7: EH complete [281927.606478] ata7.00: exception Emask 0x0 SAct 0xffffffff SErr 0x0 action 0x6 frozen [281927.614248] ata7.00: failed command: READ FPDMA QUEUED [281927.619519] ata7.00: cmd 60/08:00:20:c5:ab/00:00:c5:00:00/40 tag 0 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.634652] ata7.00: status: { DRDY } [281927.638413] ata7.00: failed command: READ FPDMA QUEUED [281927.643651] ata7.00: cmd 60/08:08:50:c5:ab/00:00:c5:00:00/40 tag 1 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.658780] ata7.00: status: { DRDY } [281927.662550] ata7.00: failed command: READ FPDMA QUEUED [281927.667786] ata7.00: cmd 60/08:10:70:c5:ab/00:00:c5:00:00/40 tag 2 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.682911] ata7.00: status: { DRDY } [281927.686675] ata7.00: failed command: READ FPDMA QUEUED [281927.691916] ata7.00: cmd 60/08:18:80:c5:ab/00:00:c5:00:00/40 tag 3 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.707034] ata7.00: status: { DRDY } [281927.710803] ata7.00: failed command: READ FPDMA QUEUED [281927.716047] ata7.00: cmd 60/08:20:90:c5:ab/00:00:c5:00:00/40 tag 4 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.731165] ata7.00: status: { DRDY } [281927.734925] ata7.00: failed command: READ FPDMA QUEUED [281927.740159] ata7.00: cmd 60/08:28:a0:c5:ab/00:00:c5:00:00/40 tag 5 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.755278] ata7.00: status: { DRDY } [281927.759045] ata7.00: failed command: READ FPDMA QUEUED [281927.764283] ata7.00: cmd 60/08:30:b0:c5:ab/00:00:c5:00:00/40 tag 6 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.779401] ata7.00: status: { DRDY } [281927.783165] ata7.00: failed command: READ FPDMA QUEUED [281927.788412] ata7.00: cmd 60/08:38:d0:c5:ab/00:00:c5:00:00/40 tag 7 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.803536] ata7.00: status: { DRDY } [281927.807300] ata7.00: failed command: SEND FPDMA QUEUED [281927.812535] ata7.00: cmd 64/01:40:00:00:00/00:00:00:00:00/a0 tag 8 ncq dma 512 out res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.827657] ata7.00: status: { DRDY } [281927.831425] ata7.00: failed command: SEND FPDMA QUEUED [281927.836663] ata7.00: cmd 64/01:48:00:00:00/00:00:00:00:00/a0 tag 9 ncq dma 512 out res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.851778] ata7.00: status: { DRDY } [281927.855539] ata7.00: failed command: SEND FPDMA QUEUED [281927.860775] ata7.00: cmd 64/01:50:00:00:00/00:00:00:00:00/a0 tag 10 ncq dma 512 out res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.875981] ata7.00: status: { DRDY } [281927.879753] ata7.00: failed command: READ FPDMA QUEUED [281927.884990] ata7.00: cmd 60/08:58:f0:c5:ab/00:00:c5:00:00/40 tag 11 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.900218] ata7.00: status: { DRDY } [281927.903983] ata7.00: failed command: READ FPDMA QUEUED [281927.909221] ata7.00: cmd 60/08:60:10:c6:ab/00:00:c5:00:00/40 tag 12 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.924420] ata7.00: status: { DRDY } [281927.928190] ata7.00: failed command: READ FPDMA QUEUED [281927.933425] ata7.00: cmd 60/08:68:30:c6:ab/00:00:c5:00:00/40 tag 13 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.948637] ata7.00: status: { DRDY } [281927.952395] ata7.00: failed command: READ FPDMA QUEUED [281927.957631] ata7.00: cmd 60/08:70:50:c6:ab/00:00:c5:00:00/40 tag 14 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.972841] ata7.00: status: { DRDY } [281927.976602] ata7.00: failed command: READ FPDMA QUEUED [281927.981847] ata7.00: cmd 60/08:78:80:c6:ab/00:00:c5:00:00/40 tag 15 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281927.997051] ata7.00: status: { DRDY } [281928.000814] ata7.00: failed command: READ FPDMA QUEUED [281928.006065] ata7.00: cmd 60/08:80:a0:c6:ab/00:00:c5:00:00/40 tag 16 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.021278] ata7.00: status: { DRDY } [281928.025048] ata7.00: failed command: READ FPDMA QUEUED [281928.030295] ata7.00: cmd 60/08:88:c0:c6:ab/00:00:c5:00:00/40 tag 17 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.045514] ata7.00: status: { DRDY } [281928.049284] ata7.00: failed command: READ FPDMA QUEUED [281928.054518] ata7.00: cmd 60/08:90:e0:c6:ab/00:00:c5:00:00/40 tag 18 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.069728] ata7.00: status: { DRDY } [281928.073492] ata7.00: failed command: READ FPDMA QUEUED [281928.078734] ata7.00: cmd 60/08:98:00:c7:ab/00:00:c5:00:00/40 tag 19 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.093943] ata7.00: status: { DRDY } [281928.097710] ata7.00: failed command: READ FPDMA QUEUED [281928.102948] ata7.00: cmd 60/08:a0:20:c7:ab/00:00:c5:00:00/40 tag 20 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.118157] ata7.00: status: { DRDY } [281928.121909] ata7.00: failed command: READ FPDMA QUEUED [281928.127154] ata7.00: cmd 60/08:a8:40:c7:ab/00:00:c5:00:00/40 tag 21 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.142365] ata7.00: status: { DRDY } [281928.146132] ata7.00: failed command: READ FPDMA QUEUED [281928.151363] ata7.00: cmd 60/08:b0:60:c7:ab/00:00:c5:00:00/40 tag 22 ncq dma 4096 in res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.166567] ata7.00: status: { DRDY } [281928.170334] ata7.00: failed command: READ FPDMA QUEUED [281928.175581] ata7.00: cmd 60/08:b8:80:c7:ab/00:00:c5:00:00/40 tag 23 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.190784] ata7.00: status: { DRDY } [281928.194540] ata7.00: failed command: READ FPDMA QUEUED [281928.199779] ata7.00: cmd 60/08:c0:40:c4:ab/00:00:c5:00:00/40 tag 24 ncq dma 4096 in res 40/00:80:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.214991] ata7.00: status: { DRDY } [281928.218757] ata7.00: failed command: READ FPDMA QUEUED [281928.223994] ata7.00: cmd 60/08:c8:60:c4:ab/00:00:c5:00:00/40 tag 25 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.239237] ata7.00: status: { DRDY } [281928.242998] ata7.00: failed command: READ FPDMA QUEUED [281928.248234] ata7.00: cmd 60/08:d0:80:c4:ab/00:00:c5:00:00/40 tag 26 ncq dma 4096 in res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.263437] ata7.00: status: { DRDY } [281928.267206] ata7.00: failed command: READ FPDMA QUEUED [281928.272441] ata7.00: cmd 60/08:d8:a0:c4:ab/00:00:c5:00:00/40 tag 27 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.287641] ata7.00: status: { DRDY } [281928.291398] ata7.00: failed command: READ FPDMA QUEUED [281928.296639] ata7.00: cmd 60/08:e0:c0:c4:ab/00:00:c5:00:00/40 tag 28 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.311845] ata7.00: status: { DRDY } [281928.315606] ata7.00: failed command: READ FPDMA QUEUED [281928.320846] ata7.00: cmd 60/08:e8:e0:c4:ab/00:00:c5:00:00/40 tag 29 ncq dma 4096 in res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.336062] ata7.00: status: { DRDY } [281928.339826] ata7.00: failed command: READ FPDMA QUEUED [281928.345064] ata7.00: cmd 60/08:f0:00:c5:ab/00:00:c5:00:00/40 tag 30 ncq dma 4096 in res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.360274] ata7.00: status: { DRDY } [281928.364033] ata7.00: failed command: READ FPDMA QUEUED [281928.369269] ata7.00: cmd 60/08:f8:b0:c7:ab/00:00:c5:00:00/40 tag 31 ncq dma 4096 in res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) [281928.384479] ata7.00: status: { DRDY } [281928.388257] ata7: hard resetting link [281933.710083] ata7: link is slow to respond, please be patient (ready=0) [281938.414059] ata7: COMRESET failed (errno=-16) [281938.418531] ata7: hard resetting link [281943.770001] ata7: link is slow to respond, please be patient (ready=0) [281948.449969] ata7: COMRESET failed (errno=-16) [281948.454439] ata7: hard resetting link [281953.813906] ata7: link is slow to respond, please be patient (ready=0) [281983.485608] ata7: COMRESET failed (errno=-16) [281983.490094] ata7: limiting SATA link speed to 3.0 Gbps [281983.490099] ata7: hard resetting link [281988.549570] ata7: COMRESET failed (errno=-16) [281988.554059] ata7: reset failed, giving up [281988.558196] ata7.00: disabled [281988.558477] ata7: EH complete [281988.558602] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.558611] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 c5 ab c7 d0 00 00 08 00 [281988.558619] blk_update_request: I/O error, dev sde, sector 3316369360 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [281988.558660] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.558701] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.558709] sd 6:0:0:0: [sde] tag#13 CDB: Write same(16) 93 08 00 00 00 00 92 70 fc 00 00 00 1c 00 00 00 [281988.558716] blk_update_request: I/O error, dev sde, sector 2456878080 op 0x3:(DISCARD) flags 0x800 phys_seg 1 prio class 0 [281988.569342] md/raid10:md2: sde2: rescheduling sector 6534552528 [281988.580458] sd 6:0:0:0: [sde] tag#14 CDB: Write(10) 2a 00 c6 06 4a 88 00 00 08 00 [281988.580472] blk_update_request: I/O error, dev sde, sector 3322301064 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0 [281988.586494] sd 6:0:0:0: [sde] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.597276] sd 6:0:0:0: [sde] tag#19 CDB: Read(10) 28 00 c5 ab c7 f0 00 00 08 00 [281988.597277] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.597283] sd 6:0:0:0: [sde] tag#15 CDB: Write(10) 2a 00 c6 06 4a c0 00 02 38 00 [281988.597291] blk_update_request: I/O error, dev sde, sector 3316369392 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [281988.597295] blk_update_request: I/O error, dev sde, sector 3322301120 op 0x1:(WRITE) flags 0x0 phys_seg 71 prio class 0 [281988.597306] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.608000] md/raid10:md2: sde2: rescheduling sector 6534552560 [281988.618863] sd 6:0:0:0: [sde] tag#16 CDB: Write(10) 2a 00 c6 07 bc 00 00 04 00 00 [281988.618867] blk_update_request: I/O error, dev sde, sector 3322395648 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 0 [281988.618883] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.624894] sd 6:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.636099] sd 6:0:0:0: [sde] tag#17 CDB: Write(10) 2a 00 c6 07 c0 00 00 02 40 00 [281988.636102] blk_update_request: I/O error, dev sde, sector 3322396672 op 0x1:(WRITE) flags 0x0 phys_seg 72 prio class 0 [281988.636114] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [281988.646967] sd 6:0:0:0: [sde] tag#20 CDB: Read(10) 28 00 c5 ab c8 50 00 00 08 00 [281988.646971] blk_update_request: I/O error, dev sde, sector 3316369488 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [281988.646972] sd 6:0:0:0: [sde] tag#31 CDB: Write(10) 2a 00 c6 07 c2 40 00 01 c0 00 [281988.646984] blk_update_request: I/O error, dev sde, sector 3322397248 op 0x1:(WRITE) flags 0x0 phys_seg 56 prio class 0 [281988.657676] md/raid10:md2: sde2: rescheduling sector 6534553680 [281988.668964] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=93s [281988.674566] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 c5 ab c5 00 00 00 08 00 [281988.674575] blk_update_request: I/O error, dev sde, sector 3316368640 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [281988.674618] md/raid10:md2: sde2: rescheduling sector 6534553712 [281988.685288] md/raid10:md2: sde2: rescheduling sector 6534551808 [281988.691294] md/raid10:md2: sde2: rescheduling sector 6534553744 [281988.691299] md/raid10:md2: sde2: rescheduling sector 6534553776 [281988.697322] md/raid10:md2: sde2: rescheduling sector 6534551776 [281988.703328] md/raid10:md2: sde2: rescheduling sector 6534553808 [281988.709340] md/raid10:md2: sde2: rescheduling sector 6534551744 [281988.709672] md: super_written gets error=-5 [281988.731678] md/raid10:md2: Disk failure on sde2, disabling device. md/raid10:md2: Operation continuing on 3 devices. [281988.785132] md/raid10:md2: sdf2: redirecting sector 6534552528 to another mirror [281988.878314] md/raid10:md2: sdf2: redirecting sector 6534552560 to another mirror [281988.922669] md/raid10:md2: sdf2: redirecting sector 6534553680 to another mirror [281988.930377] md/raid10:md2: sdf2: redirecting sector 6534553712 to another mirror [281988.958360] md/raid10:md2: sdf2: redirecting sector 6534553744 to another mirror [281988.988066] md/raid10:md2: sdf2: redirecting sector 6534551808 to another mirror [281988.995922] md/raid10:md2: sdf2: redirecting sector 6534553776 to another mirror [281989.025143] md/raid10:md2: sdf2: redirecting sector 6534551776 to another mirror [281989.053209] md/raid10:md2: sdf2: redirecting sector 6534551744 to another mirror [281989.082520] md/raid10:md2: sdf2: redirecting sector 6534551712 to another mirror [282630.017834] scsi_io_completion_action: 9991 callbacks suppressed [282630.017840] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [282630.017849] sd 6:0:0:0: [sde] tag#12 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [282680.918890] sd 6:0:0:0: [sde] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [282680.918895] sd 6:0:0:0: [sde] tag#24 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [282680.918897] print_req_error: 9991 callbacks suppressed [282680.918899] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [282680.929813] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [282680.929817] sd 6:0:0:0: [sde] tag#11 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [282680.929820] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [282680.940375] Buffer I/O error on dev sde1, logical block 6103280, async page read [282680.948472] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [282680.948481] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [282680.948488] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [282680.959680] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [282680.959689] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [282680.959696] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [282680.970419] Buffer I/O error on dev sde2, logical block 462739952, async page read [283843.139201] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [283843.139216] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [283843.139225] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [283843.184099] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [283843.184115] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [283843.184123] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [284430.003839] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [284430.003847] sd 6:0:0:0: [sde] tag#11 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [284507.002900] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [284507.002906] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [284507.002909] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [284507.013866] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [284507.013888] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [284507.013898] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [284507.024442] Buffer I/O error on dev sde1, logical block 6103280, async page read [284507.032584] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [284507.032591] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [284507.032598] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [284507.043720] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [284507.043726] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [284507.043732] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [284507.054440] Buffer I/O error on dev sde2, logical block 462739952, async page read [286229.991114] sd 6:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [286229.991122] sd 6:0:0:0: [sde] tag#0 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [286270.114388] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [286270.114393] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [286270.114396] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [286270.125309] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [286270.125314] sd 6:0:0:0: [sde] tag#17 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [286270.125317] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [286270.135848] Buffer I/O error on dev sde1, logical block 6103280, async page read [286270.143725] sd 6:0:0:0: [sde] tag#25 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [286270.143730] sd 6:0:0:0: [sde] tag#25 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [286270.143733] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [286270.154844] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [286270.154850] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [286270.154854] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [286270.165574] Buffer I/O error on dev sde2, logical block 462739952, async page read [287443.070742] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [287443.070757] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [287443.070766] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [287443.109090] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [287443.109110] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [287443.109121] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [288029.985993] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [288029.986006] sd 6:0:0:0: [sde] tag#13 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [288077.753341] sd 6:0:0:0: [sde] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [288077.753345] sd 6:0:0:0: [sde] tag#26 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [288077.753348] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [288077.764272] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [288077.764279] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [288077.764282] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [288077.774811] Buffer I/O error on dev sde1, logical block 6103280, async page read [288077.782629] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [288077.782634] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [288077.782638] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [288077.793772] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [288077.793781] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [288077.793788] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [288077.804500] Buffer I/O error on dev sde2, logical block 462739952, async page read [289829.972892] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [289829.972896] sd 6:0:0:0: [sde] tag#14 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [289863.235794] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [289863.235799] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [289863.235802] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [289863.246729] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [289863.246735] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [289863.246743] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [289863.257271] Buffer I/O error on dev sde1, logical block 6103280, async page read [289863.265152] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [289863.265158] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [289863.265162] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [289863.276337] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [289863.276351] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [289863.276366] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [289863.287104] Buffer I/O error on dev sde2, logical block 462739952, async page read [291043.040152] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [291043.040167] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [291043.040175] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [291043.079008] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [291043.079024] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [291043.079034] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [291629.958918] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [291629.958923] sd 6:0:0:0: [sde] tag#16 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [291695.254522] sd 6:0:0:0: [sde] tag#25 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [291695.254527] sd 6:0:0:0: [sde] tag#25 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [291695.254530] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [291695.265478] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [291695.265487] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [291695.265495] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [291695.276068] Buffer I/O error on dev sde1, logical block 6103280, async page read [291695.284240] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [291695.284249] sd 6:0:0:0: [sde] tag#21 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [291695.284257] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [291695.295411] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [291695.295420] sd 6:0:0:0: [sde] tag#4 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [291695.295428] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [291695.306159] Buffer I/O error on dev sde2, logical block 462739952, async page read [293429.946295] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [293429.946306] sd 6:0:0:0: [sde] tag#6 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [293478.384253] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [293478.384257] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [293478.384260] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [293478.395299] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [293478.395311] sd 6:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [293478.395321] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [293478.405876] Buffer I/O error on dev sde1, logical block 6103280, async page read [293478.413997] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [293478.414006] sd 6:0:0:0: [sde] tag#17 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [293478.414014] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [293478.425180] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [293478.425189] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [293478.425196] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [293478.435932] Buffer I/O error on dev sde2, logical block 462739952, async page read [294643.623973] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [294643.623991] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [294643.624000] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [294643.662545] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [294643.662563] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [294643.662573] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [295229.935126] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [295229.935131] sd 6:0:0:0: [sde] tag#17 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [295257.325489] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [295257.325494] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [295257.325497] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [295257.336515] sd 6:0:0:0: [sde] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [295257.336523] sd 6:0:0:0: [sde] tag#10 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [295257.336534] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [295257.347100] Buffer I/O error on dev sde1, logical block 6103280, async page read [295257.355420] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [295257.355430] sd 6:0:0:0: [sde] tag#8 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [295257.355437] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [295257.366647] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [295257.366661] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [295257.366669] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [295257.377397] Buffer I/O error on dev sde2, logical block 462739952, async page read [297029.921730] sd 6:0:0:0: [sde] tag#2 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [297029.921740] sd 6:0:0:0: [sde] tag#2 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [297053.722618] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [297053.722623] sd 6:0:0:0: [sde] tag#11 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [297053.722626] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [297053.733656] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [297053.733666] sd 6:0:0:0: [sde] tag#16 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [297053.733674] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [297053.744229] Buffer I/O error on dev sde1, logical block 6103280, async page read [297053.752481] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [297053.752490] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [297053.752498] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [297053.763704] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [297053.763713] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [297053.763720] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [297053.774449] Buffer I/O error on dev sde2, logical block 462739952, async page read [298243.447235] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [298243.447266] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [298243.447277] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [298243.486206] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [298243.486224] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [298243.486234] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [298829.908636] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [298829.908648] sd 6:0:0:0: [sde] tag#9 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [298918.095375] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [298918.095385] sd 6:0:0:0: [sde] tag#17 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [298918.095393] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [298918.106393] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [298918.106402] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [298918.106417] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [298918.116976] Buffer I/O error on dev sde1, logical block 6103280, async page read [298918.125169] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [298918.125179] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [298918.125186] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [298918.136380] sd 6:0:0:0: [sde] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [298918.136389] sd 6:0:0:0: [sde] tag#10 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [298918.136396] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [298918.147124] Buffer I/O error on dev sde2, logical block 462739952, async page read [300629.896719] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [300629.896729] sd 6:0:0:0: [sde] tag#4 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [300709.348682] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [300709.348687] sd 6:0:0:0: [sde] tag#11 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [300709.348689] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [300709.359720] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [300709.359728] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [300709.359736] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [300709.370340] Buffer I/O error on dev sde1, logical block 6103280, async page read [300709.378582] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [300709.378592] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [300709.378599] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [300709.389805] sd 6:0:0:0: [sde] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [300709.389818] sd 6:0:0:0: [sde] tag#19 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [300709.389829] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [300709.400554] Buffer I/O error on dev sde2, logical block 462739952, async page read [301845.813286] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [301845.813304] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [301845.813316] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [301845.853403] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [301845.853430] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [301845.853441] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [302023.663366] Process accounting resumed [302429.882683] sd 6:0:0:0: [sde] tag#3 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [302429.882690] sd 6:0:0:0: [sde] tag#3 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [302511.891434] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [302511.891439] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [302511.891442] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [302511.902342] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [302511.902344] sd 6:0:0:0: [sde] tag#31 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [302511.902347] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [302511.912871] Buffer I/O error on dev sde1, logical block 6103280, async page read [302511.921108] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [302511.921118] sd 6:0:0:0: [sde] tag#8 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [302511.921126] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [302511.932330] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [302511.932343] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [302511.932350] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [302511.943087] Buffer I/O error on dev sde2, logical block 462739952, async page read [304229.868646] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [304229.868655] sd 6:0:0:0: [sde] tag#6 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [304288.666969] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [304288.666974] sd 6:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [304288.666977] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [304288.677989] sd 6:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [304288.677998] sd 6:0:0:0: [sde] tag#20 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [304288.678006] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [304288.688563] Buffer I/O error on dev sde1, logical block 6103280, async page read [304288.696767] sd 6:0:0:0: [sde] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [304288.696777] sd 6:0:0:0: [sde] tag#24 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [304288.696785] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [304288.707979] sd 6:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [304288.707989] sd 6:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [304288.707997] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [304288.718719] Buffer I/O error on dev sde2, logical block 462739952, async page read [305445.810030] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [305445.810047] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [305445.810057] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [305445.830009] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [305445.830021] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [305445.830029] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [306029.854757] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [306029.854767] sd 6:0:0:0: [sde] tag#11 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [306113.058189] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [306113.058199] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [306113.058206] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [306113.069260] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [306113.069270] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [306113.069277] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [306113.079838] Buffer I/O error on dev sde1, logical block 6103280, async page read [306113.088066] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [306113.088076] sd 6:0:0:0: [sde] tag#13 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [306113.088083] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [306113.099238] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [306113.099247] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [306113.099255] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [306113.109987] Buffer I/O error on dev sde2, logical block 462739952, async page read [307829.840965] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [307829.840970] sd 6:0:0:0: [sde] tag#14 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [307880.578331] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [307880.578336] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [307880.578340] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [307880.589257] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [307880.589259] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [307880.589262] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [307880.599792] Buffer I/O error on dev sde1, logical block 6103280, async page read [307880.607989] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [307880.607999] sd 6:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [307880.608007] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [307880.619204] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [307880.619213] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [307880.619221] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [307880.629951] Buffer I/O error on dev sde2, logical block 462739952, async page read [309046.230421] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [309046.230446] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [309046.230458] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [309046.271413] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [309046.271430] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [309046.271440] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [309629.828180] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [309629.828190] sd 6:0:0:0: [sde] tag#12 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [309687.941666] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [309687.941671] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [309687.941673] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [309687.952681] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [309687.952691] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [309687.952698] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [309687.963264] Buffer I/O error on dev sde1, logical block 6103280, async page read [309687.971513] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [309687.971522] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [309687.971530] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [309687.982701] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [309687.982707] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [309687.982712] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [309687.993419] Buffer I/O error on dev sde2, logical block 462739952, async page read [311429.814735] sd 6:0:0:0: [sde] tag#19 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [311429.814752] sd 6:0:0:0: [sde] tag#19 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [311470.239327] sd 6:0:0:0: [sde] tag#0 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [311470.239332] sd 6:0:0:0: [sde] tag#0 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [311470.239336] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [311470.250355] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [311470.250364] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [311470.250372] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [311470.260937] Buffer I/O error on dev sde1, logical block 6103280, async page read [311470.269147] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [311470.269156] sd 6:0:0:0: [sde] tag#7 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [311470.269164] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [311470.280371] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [311470.280380] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [311470.280388] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [311470.291118] Buffer I/O error on dev sde2, logical block 462739952, async page read [312646.099263] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [312646.099282] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [312646.099292] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [312646.137758] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [312646.137776] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [312646.137786] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [313229.801360] sd 6:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [313229.801370] sd 6:0:0:0: [sde] tag#20 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [313258.679054] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [313258.679058] sd 6:0:0:0: [sde] tag#11 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [313258.679061] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [313258.690031] sd 6:0:0:0: [sde] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [313258.690040] sd 6:0:0:0: [sde] tag#26 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [313258.690047] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [313258.700598] Buffer I/O error on dev sde1, logical block 6103280, async page read [313258.708791] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [313258.708800] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [313258.708808] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [313258.719998] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [313258.720007] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [313258.720014] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [313258.730740] Buffer I/O error on dev sde2, logical block 462739952, async page read [315029.787679] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [315029.787693] sd 6:0:0:0: [sde] tag#15 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [315078.234591] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [315078.234595] sd 6:0:0:0: [sde] tag#16 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [315078.234598] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [315078.245554] sd 6:0:0:0: [sde] tag#17 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [315078.245557] sd 6:0:0:0: [sde] tag#17 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [315078.245559] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [315078.256130] Buffer I/O error on dev sde1, logical block 6103280, async page read [315078.264059] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [315078.264066] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [315078.264072] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [315078.275225] sd 6:0:0:0: [sde] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [315078.275228] sd 6:0:0:0: [sde] tag#18 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [315078.275231] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [315078.285937] Buffer I/O error on dev sde2, logical block 462739952, async page read [316246.384840] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [316246.384858] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [316246.384868] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [316246.422945] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [316246.422961] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [316246.422971] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [316829.774705] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [316829.774711] sd 6:0:0:0: [sde] tag#5 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [316876.573274] sd 6:0:0:0: [sde] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [316876.573279] sd 6:0:0:0: [sde] tag#11 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [316876.573282] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [316876.584308] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [316876.584322] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [316876.584333] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [316876.594890] Buffer I/O error on dev sde1, logical block 6103280, async page read [316876.603037] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [316876.603047] sd 6:0:0:0: [sde] tag#29 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [316876.603055] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [316876.614265] sd 6:0:0:0: [sde] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [316876.614275] sd 6:0:0:0: [sde] tag#24 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [316876.614282] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [316876.625007] Buffer I/O error on dev sde2, logical block 462739952, async page read [318629.764007] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [318629.764012] sd 6:0:0:0: [sde] tag#21 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [318667.303394] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [318667.303400] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [318667.303403] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [318667.314380] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [318667.314393] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [318667.314401] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [318667.324949] Buffer I/O error on dev sde1, logical block 6103280, async page read [318667.333173] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [318667.333182] sd 6:0:0:0: [sde] tag#29 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [318667.333190] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [318667.344323] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [318667.344334] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [318667.344349] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [318667.355068] Buffer I/O error on dev sde2, logical block 462739952, async page read [319846.290634] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [319846.290649] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [319846.290657] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [319846.327690] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [319846.327708] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [319846.327718] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [320429.750279] sd 6:0:0:0: [sde] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [320429.750289] sd 6:0:0:0: [sde] tag#7 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [320456.483437] sd 6:0:0:0: [sde] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [320456.483442] sd 6:0:0:0: [sde] tag#23 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [320456.483445] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [320456.494407] sd 6:0:0:0: [sde] tag#20 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [320456.494411] sd 6:0:0:0: [sde] tag#20 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [320456.494414] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [320456.504947] Buffer I/O error on dev sde1, logical block 6103280, async page read [320456.512683] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [320456.512687] sd 6:0:0:0: [sde] tag#8 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [320456.512689] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [320456.523846] sd 6:0:0:0: [sde] tag#25 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [320456.523854] sd 6:0:0:0: [sde] tag#25 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [320456.523860] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [320456.534576] Buffer I/O error on dev sde2, logical block 462739952, async page read [322229.736592] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [322229.736598] sd 6:0:0:0: [sde] tag#15 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [322278.454728] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [322278.454734] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [322278.454738] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [322278.465751] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [322278.465768] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [322278.465777] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [322278.476333] Buffer I/O error on dev sde1, logical block 6103280, async page read [322278.484515] sd 6:0:0:0: [sde] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [322278.484525] sd 6:0:0:0: [sde] tag#26 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [322278.484533] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [322278.495735] sd 6:0:0:0: [sde] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [322278.495744] sd 6:0:0:0: [sde] tag#1 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [322278.495752] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [322278.506494] Buffer I/O error on dev sde2, logical block 462739952, async page read [323026.378208] usb 1-13: new low-speed USB device number 5 using xhci_hcd [323026.530123] usb 1-13: New USB device found, idVendor=c0f4, idProduct=04f5, bcdDevice= 1.10 [323026.530131] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [323026.530135] usb 1-13: Product: Usb KeyBoard [323026.530139] usb 1-13: Manufacturer: Usb KeyBoard [323026.570085] hid: raw HID events driver (C) Jiri Kosina [323026.579455] usbcore: registered new interface driver usbhid [323026.579457] usbhid: USB HID core driver [323026.585457] input: Usb KeyBoard Usb KeyBoard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:C0F4:04F5.0001/input/input2 [323026.642488] hid-generic 0003:C0F4:04F5.0001: input,hidraw0: USB HID v1.10 Keyboard [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-13/input0 [323026.642835] input: Usb KeyBoard Usb KeyBoard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:C0F4:04F5.0002/input/input3 [323026.702499] input: Usb KeyBoard Usb KeyBoard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:C0F4:04F5.0002/input/input4 [323026.702654] hid-generic 0003:C0F4:04F5.0002: input,hidraw1: USB HID v1.10 Device [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-13/input1 [323446.126630] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [323446.126667] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [323446.126677] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [323446.167002] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [323446.167030] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [323446.167041] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [324029.722961] sd 6:0:0:0: [sde] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [324029.722968] sd 6:0:0:0: [sde] tag#13 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [324057.673934] sd 6:0:0:0: [sde] tag#27 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [324057.673938] sd 6:0:0:0: [sde] tag#27 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [324057.673941] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [324057.684904] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [324057.684919] sd 6:0:0:0: [sde] tag#4 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [324057.684930] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [324057.695477] Buffer I/O error on dev sde1, logical block 6103280, async page read [324057.703258] sd 6:0:0:0: [sde] tag#28 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [324057.703261] sd 6:0:0:0: [sde] tag#28 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [324057.703265] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [324057.714432] sd 6:0:0:0: [sde] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [324057.714440] sd 6:0:0:0: [sde] tag#5 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [324057.714446] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [324057.725162] Buffer I/O error on dev sde2, logical block 462739952, async page read [325829.708775] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [325829.708780] sd 6:0:0:0: [sde] tag#22 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [325900.288523] sd 6:0:0:0: [sde] tag#29 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [325900.288529] sd 6:0:0:0: [sde] tag#29 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [325900.288534] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [325900.299451] sd 6:0:0:0: [sde] tag#24 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [325900.299455] sd 6:0:0:0: [sde] tag#24 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [325900.299458] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [325900.310008] Buffer I/O error on dev sde1, logical block 6103280, async page read [325900.318208] sd 6:0:0:0: [sde] tag#21 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [325900.318217] sd 6:0:0:0: [sde] tag#21 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [325900.318225] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [325900.329348] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [325900.329355] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [325900.329359] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [325900.340066] Buffer I/O error on dev sde2, logical block 462739952, async page read [327048.611435] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [327048.611452] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [327048.611463] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [327048.651137] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [327048.651153] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [327048.651163] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [327629.695297] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [327629.695308] sd 6:0:0:0: [sde] tag#16 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [327695.335462] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [327695.335467] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [327695.335469] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [327695.346441] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [327695.346446] sd 6:0:0:0: [sde] tag#6 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [327695.346450] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [327695.356992] Buffer I/O error on dev sde1, logical block 6103280, async page read [327695.365223] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [327695.365232] sd 6:0:0:0: [sde] tag#8 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [327695.365240] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [327695.376453] sd 6:0:0:0: [sde] tag#31 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [327695.376462] sd 6:0:0:0: [sde] tag#31 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [327695.376470] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [327695.387194] Buffer I/O error on dev sde2, logical block 462739952, async page read [329429.681927] sd 6:0:0:0: [sde] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [329429.681934] sd 6:0:0:0: [sde] tag#6 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [329476.994403] sd 6:0:0:0: [sde] tag#30 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [329476.994407] sd 6:0:0:0: [sde] tag#30 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [329476.994410] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [329477.005452] sd 6:0:0:0: [sde] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [329477.005461] sd 6:0:0:0: [sde] tag#9 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [329477.005468] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [329477.016019] Buffer I/O error on dev sde1, logical block 6103280, async page read [329477.023854] sd 6:0:0:0: [sde] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [329477.023859] sd 6:0:0:0: [sde] tag#15 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [329477.023862] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [329477.035034] sd 6:0:0:0: [sde] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [329477.035043] sd 6:0:0:0: [sde] tag#12 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [329477.035050] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [329477.045772] Buffer I/O error on dev sde2, logical block 462739952, async page read [330648.600009] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [330648.600028] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [330648.600038] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [330648.626277] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [330648.626306] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [330648.626315] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [331229.667910] sd 6:0:0:0: [sde] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [331229.667920] sd 6:0:0:0: [sde] tag#8 CDB: ATA command pass through(16) 85 06 2c 00 00 00 00 00 00 00 00 00 00 00 e5 00 [331305.620682] sd 6:0:0:0: [sde] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [331305.620692] sd 6:0:0:0: [sde] tag#22 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [331305.620698] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [331305.631716] sd 6:0:0:0: [sde] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [331305.631728] sd 6:0:0:0: [sde] tag#16 CDB: Read(10) 28 00 02 e9 0f 80 00 00 08 00 [331305.631738] blk_update_request: I/O error, dev sde, sector 48828288 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [331305.642287] Buffer I/O error on dev sde1, logical block 6103280, async page read [331305.650488] sd 6:0:0:0: [sde] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [331305.650498] sd 6:0:0:0: [sde] tag#14 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [331305.650505] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [331305.661634] sd 6:0:0:0: [sde] tag#4 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK cmd_age=0s [331305.661643] sd 6:0:0:0: [sde] tag#4 CDB: Read(10) 28 00 df 8f df 80 00 00 08 00 [331305.661667] blk_update_request: I/O error, dev sde, sector 3750748032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [331305.672399] Buffer I/O error on dev sde2, logical block 462739952, async page read